Learn More: Briarcliff Mold Removal Company Services
There may be many times when indoor mold growth may be difficult to find. It can be hidden behind walls, under surfaces, and inside unreachable areas where the visibility is almost impossible. Just because it’s invisible doesn’t mean it’s undefeatable, however. Here’s how to spot hidden mold dangers and make your home a little more livable in this toxin filled world.
One of the most common indications that you may have invisible mold growing in your home is a water leak. If you’ve had any recent flooding, roof damage or a plumbing leak, you may have a mold problem. Look around the areas where the leak occurred for moisture.
If you still can’t find the source of the problem, you may want to call on a Briarcliff professional to help you find any hidden mold dangers in your home. This may seem like an expensive alternative, but remember that mold can turn into a serious problem if they are not resolved quickly. It’s always better to be safe than sorry.
Learn More: Briarcliff Mold Remediation Company Services
Water damage can come from many different sources in your home or business. From a simple roof leak to serious weather conditions such as hurricanes can give you flood damage to your house. When flood damage happens, rug materials absorb large amount of water and high amount of bacteria will reside inside the pile and construction of the rug. Water damage can provide the necessary conditions for mold growth in Briarcliff TX. Water damage cause several damages within hours or even minutes. Water damage will give you an unhealthy environment.
When you face theses type of situations in Briarcliff Texas the first thing that you should take care of is that you shouldn’t panic. The latest technologies can help you if flood damage occurs from flooding, broken water pipes, or any other source. Emergency water extraction from carpets, floor covering and remediation of mold can be easily done as technology had changed a lot and lot different from the conventional carpet cleaning mechanisms.
Briarcliff Mold Inspection company
From the dawn of time mold has been on this planet. It comes in a variety of forms and colors and is caused by fungus growth. The spores of mold can cause the spread of this organism and certain factors can spur its growth. Mold needs a source of food, dampness, humidity and the spores themselves to be able to evolve.
Mold is present outdoors as well as inside. Typical places that mold grows are ceilings, wallpaper, wood, painted areas and carpets. It is quite normal to find it in places such as the basement or the bathroom. A few types of mold can be toxic and therefore dangerous to human health; this is the best reason to eradicate the problem. People can develop allergies to mold and many of the symptoms of suffering from the effects of mold include a runny nose, sneezing, itchy and red eyes as well as headaches.
There are easy ways in which you can rid your property of mold. In fact something as common and ordinary as vinegar can be used to get rid of mold. You can use a bottle to spray the vinegar directly onto the affected areas like grout in tiles, shower cubicles and the seals on faucets. Mold can grow anywhere in the home so remember to check all areas thoroughly- that unused kitchen cabinet with its food remnants and dampness will be a perfect place for mold to form.
A portable air conditioner is a handy utensil to have. During the hot and humid weather it will help to stop mold growing in your home. The humidity of your property should be kept at approximately 30%-50% to be productive.
In the winter months when it is colder, a dehumidifier is a great asset in the fight against the formation of mold in the home. Again, the humidity level should be maintained around the 30%-50% mark, but should still be at a pleasant level for your room temperature.
One of the commonest places to find mold is in the carpet. If you find that mold has settled on your carpet there are basically two options; you can replace the carpet with wooden flooring, or treat the carpet with baking soda. Leave the baking soda to sit on the carpet for a few hours and then vacuum off.
If the influx of mold is serious, then it may be best to consider calling the professionals to deal with the problem. An assessor can visit your home and identify the type of mold growing. Then a team will use tools such as wet vacuums, dry wipe materials and HEPA vacuums to eradicate the problem. There is a slight possibility that any lingering mold spores in the air may cause it to return, in which case a second treatment may be needed.
There is a serious element to mold being in your home and it should be considered an immediate problem, due to the possible risks to your health. As soon as you spot that mold forming tackle the problem quickly and head on.
Mold Inspections - Make the Best Choice
Before a person ever decides to search for the best mold inspection company in their area, they should first know a few facts:
1. In the author's opinion, every house on the planet has mold in it. Mold is a member of the Fungi family and exists naturally in our environment. It is airborne and enters our houses whenever a door or window is open and in numerous other ways.
2. Inside of a house, mold will not be a problem unless it has been exposed to water for more than 48-72 hours. So, if you have seen, or know of evidence of water inside your house and you suspect that it has been there for at least 48 hours, you are most certain to have harmful (toxic) mold.
3. Even if you can't see any water, it still may be lurking behind your walls, sinks, or tubs; perhaps under windows or other locations. If you can smell a musty or unpleasant odor (some in the family may detect it while others can't), you have a harmful mold problem.
4. If you or other members of your house have asthma, other respiratory problems, coughing, runny nose or eyes, headaches, or tend to feel much better when you are away from the house and worse when you are in it, you almost certainly have a mold problem.
Knowing that you likely have a mold problem but not knowing what to do next, speaks volumes in favor of hiring a professional. But which one? You could likely have several mold inspection companies to chose from on sites like Yahoo or Google; but how does a homeowner find the best one for their needs?
My advice is: First I recommend that the company specializes in mold. Not mold and/or radon, lead, air ducts, etc. Next, I recommend that they have both education and experience at least equal to or better than their competitors. While most every state requires that home inspectors be licensed, only two states require so of mold inspectors.Are they certified? This would tell you that they cared enough about their profession to acquire knowledge and training to meet standards. Experience counts. How long has the inspector been certified? How many jobs have they performed? Not just the company, but the individual inspector? Can they get references? Have they been cited by the Better Business Bureau for any deceptive, misleading, or dishonest practices?
The next criteria is critical: Are they also in the business of mold remediation or removal? If they are it could be a blatant conflict of interest. Wouldn't it be to there interest to overstate the level of mold problems and/or the amount of remediation needed if they were in line to pick up a job worth several thousands of dollars? Therefore, I recommend that you find a professional who only inspects for mold.
OK, so now how should your inspector look for and find your problem? When they are finished will they be able to tell you for certain where your mold is and why you have the problem? Isn't that how you would like to spend your money?
Testing for mold is most often done by the old fashioned method called air testing. This procedure sucks air into a machine that then traps it into a laboratory testing dish, which in turn gets sent to a laboratory for culturing. This process can take a week or more for the results. When air testing is performed, the inspector should always take one test outside of the house in order to determine a benchmark as to what mold(s) are prevalent in your area. They then will try to take as many tests inside of the house as the customer can afford. In most areas of the country, these tests cost about $100 each. Some of the problems with air testing are:
1. The more tests that are performed, the more costly the job.
2. Air testing is highly inaccurate. All it can do is to tell you what was in the air at that location at that moment in time. Results can vary widely over time and method used. Airborne fungal spore concentrations vary greatly over the course of hours, days, weeks, and seasons.
3. In colder climates when there is snow on the ground, the results of the outside test will be useless in that spore count is greatly or totally reduced. I have yet to hear that a customer was told this fact.
4. There are no numerical standards to which tests can be prepared, making interpretation difficult.
5. Even the best tests can not determine how much exposure people in the house have had in the past.
6. Fungal air tests are expensive.
7. Results are slow to receive.
8. Knowing the type of mold does not change the way that you would respond. All mold that is active, or was active, is bad mold.
Then what does represent a professional, accurate, and helpful mold inspection? The most intelligent inspections should: Find all mold. Determine the cause; i.e. Where is the water problem(s). Explain how to fix the problem(s).
This inspection requires work, experience, and knowledge. It is also labor intensive; lasting about 2 hours or more on average. It begins with an intensive investigation of the property outside of the house. It finds flaws in roofs, chimneys, gutters, downspouts, foundations, and/or landscaping. In short, anywhere and any way that water could get into the house and cause a problem. Then, moving inside the inspection closely is conducted looking throughout the house, basement, and attic for issues under windows, sinks, tubs, showers, washer and dryers. Tools such as moisture meters, hygrometers, and boroscopes should be utilized as appropriate.
Following that, in my inspections, I work with a Certified Mold Dog. Together we systematically cover every inch of the house. Dogs such as mine have the ability to detect the scent of mold in one part per trillion. Humans are limited to one part per hundred. Two university studies are known that matched dogs scenting ability versus that of machines. Dogs won easily both times. Dogs have the ability to detect the scent of mold from behind walls, floors, or ceilings where it often is found. No machine can do that. With their ability to pinpoint the location of the mold, remediation costs are reduced to a fraction of what they may have been, or eliminated entirely.
Lastly, the customer should ask for, and receive a professionally written report that captures all that was seen, found, and measured during the inspection and remediation recommendations. This is how my company, Mold Rover, Inc. operates. It is what I think the customer needs and deserves for their money.
Mold Growth From a Leaking Dryer Vent
Think you've got mold? Mold sampling is the first thing to do. There are several ways to collect and analyze mold samples. You can take a surface sample, air sample or use a do-it-yourself kit.
The most basic type of mold sampling is surface sampling. If you've got visible mold in your house, you can take a sample of it, and analyze it to see if it is toxic or not.
There are a number of techniques for taking samples. One method is to use clear tape. Stick the tape to the surface, peel it off, and drop the tape into a plastic bag with the mold sample stuck to it. This sample can then be analyzed.
You can also swab the area for samples. You can take a regular Q-tip and swab the area 3-4 times, then drop the samples into a bag for further inspection.
Air sampling is the best way to check your mold problem. The results will tell you if you've got airborne mold spores already floating around your house, wreaking havoc on everybody's lungs.
The inspector uses a pump and spore trap. The pump sucks up air and holds it in the spore trap where it can be analyzed. It pumps not only air, but also bits of dust and insects which can reveal more accurately the amount of spores in the air.
This is the most reliable way to check for mold problems because it looks for the spores themselves. The inspector takes samples from various parts of the house, as well as inside walls and under floors. Often, mold infestations aren't visible to the naked eye.
At-Home Sampling Kits
You can buy at-home mold sampling kits to use yourself. These are easy and give quick results. The only downside is that they don't do as thorough a job as a professional mold inspector. There is some margin for errors.
Mold sampling is the first step in ridding your home of mold. If you think you have a problem, check it out and clean it up immediately.
How to Get Rid of Mold - Common Causes and Cleaning Techniques
There is now a lot of evidence to connect black mold with Sudden Infant Death Syndrome (SIDS) and miscarriage. The death of an infant can be devastating for a family so can losing a baby due to miscarriage. It is vital that any steps needed to prevent these awful events should be taken.
It is not just the fact that black mold is toxic that means that it is dangerous to infants. One way that it is believed to work is that black mold spores end up in baby's mattress and they releases harmful chemicals from the mattress into the air and the baby breathes this lethal gas. This process is believed to be responsible for many cases of SIDS.
Black mold has also been associated with miscarriage. It seems that exposure to mold toxin could be the cause of many women losing their baby during pregnancy. Not all mold is toxic, but it is almost impossible to tell this by just looking. The usual way to determine toxicity is by sending the mold to be tested in a laboratory. This is why it is probably a good idea that pregnant women treat all mold as if it were toxic and keeping well away from it.
The best way to stop black mold from becoming an issue for infants and those who are pregnant is to prevent it occurring in your home, and if you do have it to quickly eliminate the problem. This can be a difficult issue for those who are living in rented accommodation and have a landlord who just won't do anything about your mold problem. The advice here is to find somewhere else to stay either permanently or until the problem is fixed.
The real danger comes when black mold is growing and you are not even aware of it. Mold likes damp places that are poorly ventilated so make sure you check your attic and basement and any other cubby holes. Of course, if you are pregnant you will want someone else to conduct this search for you. In most instances eradicating the mold will be fairly straight forward so long as you discover it all. Pregnant women should not be involved in any part of the cleaning up process, but be kept well away from the area in case toxic spores are released into the air. When the mold is completely removed you will then need to take measures to make sure it doesn't back again.
- Basement Mold Removal Briarcliff
- Basement Mold Removal Cost Briarcliff
- Mold Remediation Briarcliff
- Mold Removal Briarcliff
- Black Mold Inspection Cost Briarcliff
- Black Mold Removal Briarcliff
- Black Mold Removal Cost Briarcliff
- Black Mold Removal Services Briarcliff
- Black Mold Specialist Briarcliff
- Black Mold Testing Briarcliff
- Black Mold Testing Cost Briarcliff
- Mold Specialist Briarcliff
- Commercial Mold Testing Briarcliff
- Cost To Remove Mold From House Briarcliff
- Detecting Black Mold In The Home Briarcliff
- Home Inspection Mold Testing Briarcliff
- Home Mold Inspection Cost Briarcliff
- Home Mold Removal Cost Briarcliff
- Home Mold Removal Service Briarcliff
- House Mold Inspection Briarcliff
- House Mold Inspection Cost Briarcliff
- House Mold Remediation Briarcliff
- House Mold Removal Briarcliff
- Indoor Mold Test Briarcliff
- Local Mold Removal Briarcliff
- Mold Air Test Briarcliff
- Mold And Mildew Removal Briarcliff
- Mold And Mildew Specialist Briarcliff
- Mold And Mildew Testing Briarcliff
- Mold Cleaning Briarcliff
- Mold Cleaning Service Briarcliff
- Mold Cleanup Cost Briarcliff
- Mold Detection Briarcliff
- Mold Detection Services Briarcliff
- Mold Inspection Briarcliff
- Mold Inspection And Remediation Briarcliff
- Mold Inspection And Removal Briarcliff
- Mold Inspection And Testing Briarcliff
- Mold Inspection And Testing Briarcliff
- Mold Inspection Cost Briarcliff
- Mold Inspection Service Briarcliff
- Mold Inspection Specialists Briarcliff
- Mold Remediation Briarcliff
- Mold Remediation Cost Briarcliff
- Mold Remediation Services Briarcliff
- Mold Remediation Specialist Briarcliff
- Mold Removal Services Briarcliff
- Mold Removal Specialist Briarcliff
- Mold Repair Briarcliff
- Mold Restoration Briarcliff
- Mold Restoration Services Briarcliff
- Mold Testing Briarcliff
- Mold Testing And Remediation Briarcliff
- Mold Testing And Removal Briarcliff
- Mold Testing Cost Briarcliff
- Mold Testing Services Briarcliff
- Mold Treatment Briarcliff