Coupland

Learn More: Coupland  Mold Removal Company Services

There may be many times when indoor mold growth may be difficult to find. It can be hidden behind walls, under surfaces, and inside unreachable areas where the visibility is almost impossible. Just because it’s invisible doesn’t mean it’s undefeatable, however. Here’s how to spot hidden mold dangers and make your home a little more livable in this toxin filled world.

One of the most common indications that you may have invisible mold growing in your home is a water leak. If you’ve had any recent flooding, roof damage or a plumbing leak, you may have a mold problem. Look around the areas where the leak occurred for moisture.

If you still can’t find the source of the problem, you may want to call on a Coupland professional to help you find any hidden mold dangers in your home. This may seem like an expensive alternative, but remember that mold can turn into a serious problem if they are not resolved quickly. It’s always better to be safe than sorry.

Mold On Clothes

Learn More: Coupland  Mold Remediation Company Services

Water damage can come from many different sources in your home or business. From a simple roof leak to serious weather conditions such as hurricanes can give you flood damage to your house. When flood damage happens, rug materials absorb large amount of water and high amount of bacteria will reside inside the pile and construction of the rug. Water damage can provide the necessary conditions for mold growth in Coupland  TX. Water damage cause several damages within hours or even minutes. Water damage will give you an unhealthy environment.

Mold Mitigation

When you face theses type of situations in Coupland Texas the first thing that you should take care of is that you shouldn’t panic. The latest technologies can help you if flood damage occurs from flooding, broken water pipes, or any other source. Emergency water extraction from carpets, floor covering and remediation of mold can be easily done as technology had changed a lot and lot different from the conventional carpet cleaning mechanisms.

Coupland Mold Inspection company

Mold, in simpler terms, is a tiny organism, or fungi, that grow where water and oxygen are present on any natural substance. A small amount of mold is not a problem but, a large amount is. Mold can cause bad odors, health problems and destroy your house. So, how much does mold remediation cost? The cost depends on the type of mold that is present.

If the area affected by mold is not very big, you try some home remedies of the removal products that are available. To try removing black mold yourself, using detergent and water, scrub the area where the mold is present. Let that area dry. The mold should disappear.

If the area where the mold is at is quiet big, you are going to need the help of a mold removal specialist. On average, mold removal in a crawl space can cost between $500 and $4000. A single wall can cost around $3000. For areas like basements and bathrooms it can cost up $6000 to have it removed. If there is damage to the structure or furniture, costs can skyrocket to $10, 000 to $30, 000. It is believed that the average claim cost is between $30, 000 and $50, 000.

Mold is usually caused by water leaks. To stop the mold issue completely, plumbing work may need to be done. Again, this type of repair will depend on the amount of work that needs t o be done.

If the there is a large amount of toxic mold, the removal can only take place if the property is not inhabited. Temporary housing is another cost that could happen.

This is not a project for an inexperienced person. This job requires the right equipment, the right personnel, and insurance.

Mold Abatement

Asthma and Allergies - Hidden Mold Can Affect Your Asthma Or Allergies

Mold & Moisture

The crawl space is the number one source for potential moisture entering your home. The moisture may be equal to gallons of water but in vapor form and not even visible. A seal tight liner kit will instantly stop the moisture in the crawl space from entering home as well as eliminating radon gas, musty odors, mildew and mold.

"The U.S. EPA states: "Molds are usually not a problem unless mold spores land on a wet or damp spot and begin growing. Molds produce allergens, irritants and potentially toxic substances. The key to mold control is moisture control. The mold will not grow if moisture is not present (source: EPA " A Brief Guide to Mold, Mildew and Your Home," publication #402-K-02-003)."

Eliminate the Existing Mold

To eliminate and prevent future mold growth, spray the affected areas with a mold killing and growth preventing spray, there are good products for purchase at your local building supply house.

My Take on the Problems with Bleach

The Myth Of Using Bleach To Kill Mold! Mold has a root system that actually grows into the surfaces of wood, drywall, concrete, etc..., like tree roots grow into the soil. The roots are not killed by bleach alone because the bleach does not penetrate the surface of porous materials. The bleach chemical portion sits on the surface until gassing off, killing only the mold on the surface leaving the roots intact, while the water portion of the bleach soaks into the material giving the mold roots a food source to start growing again. Think of it this way, if you were to cut a tree, plant, grass, or anything that has roots down and you water the area, you will see what you cut start to grow again. This is because the roots were not killed. The other problem with using bleach for an extended period is that if sprayed on wood and other building materials it actually starts to break down the products.

STOPPING MOLD AT THE ROOTS IS THE ONLY WAY!!!

Chlorine Bleach is NOT a registered EPA Mold Killing product!

If you think that we're just knocking bleach. Don't take our word for it! Go to http://epa.gov/mold/moldcourse/index.html and read what the EPA has to say about using bleach to kill mold. The EPA says that "The use of bleach is not recommended as a routine practice during mold clean-up" http://iaq.custhelp.com question #7.

Now you might ask: How do I kill mold if not with bleach?

Answer: Use an EPA approved and registered fungicide to kill the mold at its roots.

Mold Home Inspection

Mold Inspections - Make the Best Choice

From the dawn of time mold has been on this planet. It comes in a variety of forms and colors and is caused by fungus growth. The spores of mold can cause the spread of this organism and certain factors can spur its growth. Mold needs a source of food, dampness, humidity and the spores themselves to be able to evolve.

Mold is present outdoors as well as inside. Typical places that mold grows are ceilings, wallpaper, wood, painted areas and carpets. It is quite normal to find it in places such as the basement or the bathroom. A few types of mold can be toxic and therefore dangerous to human health; this is the best reason to eradicate the problem. People can develop allergies to mold and many of the symptoms of suffering from the effects of mold include a runny nose, sneezing, itchy and red eyes as well as headaches.

There are easy ways in which you can rid your property of mold. In fact something as common and ordinary as vinegar can be used to get rid of mold. You can use a bottle to spray the vinegar directly onto the affected areas like grout in tiles, shower cubicles and the seals on faucets. Mold can grow anywhere in the home so remember to check all areas thoroughly- that unused kitchen cabinet with its food remnants and dampness will be a perfect place for mold to form.

A portable air conditioner is a handy utensil to have. During the hot and humid weather it will help to stop mold growing in your home. The humidity of your property should be kept at approximately 30%-50% to be productive.

In the winter months when it is colder, a dehumidifier is a great asset in the fight against the formation of mold in the home. Again, the humidity level should be maintained around the 30%-50% mark, but should still be at a pleasant level for your room temperature.

One of the commonest places to find mold is in the carpet. If you find that mold has settled on your carpet there are basically two options; you can replace the carpet with wooden flooring, or treat the carpet with baking soda. Leave the baking soda to sit on the carpet for a few hours and then vacuum off.

If the influx of mold is serious, then it may be best to consider calling the professionals to deal with the problem. An assessor can visit your home and identify the type of mold growing. Then a team will use tools such as wet vacuums, dry wipe materials and HEPA vacuums to eradicate the problem. There is a slight possibility that any lingering mold spores in the air may cause it to return, in which case a second treatment may be needed.

There is a serious element to mold being in your home and it should be considered an immediate problem, due to the possible risks to your health. As soon as you spot that mold forming tackle the problem quickly and head on.

Mold Wood

Mold Detection - How to Detect Toxic Mold in Your Home?

Fungi such as the Stachybotrys mold produce secondary metabolites such as antibiotics (e.g., penicillin), mycotoxins, and those that produce the acrid, musty smell characteristic of mold growth.

It's important to test for mold in your home because most symptoms of black mold illnesses are closely similar to sinusitis symptoms and may therefore be pooh-poohed by some physicians. They'll prescribe decongestants to relieve your stuffy nose or perhaps recommend syrups to alleviate the coughing, but if these are due to the Stachybotrys mold, then you're barely scratching the surface.

Apart from the symptoms that the non-toxic mold can cause in a person, the Stachybotrys mold effects severe, often long-term effects on the victim. Nausea and vomiting have been reported by patients, and this is because the mold can work its way to the digestive system.

Of course, the cleanup doesn't come with the inspection. If the results are positive, you would have to hire the services of a separate cleanup team. The work all this entails could easily chalk up several hundred dollars, but if you care about your health, then you shouldn't be worrying about the cost. Besides, tackling the problem would early on would nip the problem in the bud, so to speak.

You may alternatively want to purchase a mold inspection kit to check for the presence of the Stachybotrys mold yourself. These kits include high-tech mold testing films to check for contamination in the air or on surfaces. Apart from the films, kits normally have mold detection and cleaning guides, test kit instructions, and a screening kit.


Black Mold Testing Companies