Martindale

Learn More: Martindale  Mold Removal Company Services

There may be many times when indoor mold growth may be difficult to find. It can be hidden behind walls, under surfaces, and inside unreachable areas where the visibility is almost impossible. Just because it’s invisible doesn’t mean it’s undefeatable, however. Here’s how to spot hidden mold dangers and make your home a little more livable in this toxin filled world.

One of the most common indications that you may have invisible mold growing in your home is a water leak. If you’ve had any recent flooding, roof damage or a plumbing leak, you may have a mold problem. Look around the areas where the leak occurred for moisture.

If you still can’t find the source of the problem, you may want to call on a Martindale professional to help you find any hidden mold dangers in your home. This may seem like an expensive alternative, but remember that mold can turn into a serious problem if they are not resolved quickly. It’s always better to be safe than sorry.

Mold Abatement

Learn More: Martindale  Mold Remediation Company Services

Water damage can come from many different sources in your home or business. From a simple roof leak to serious weather conditions such as hurricanes can give you flood damage to your house. When flood damage happens, rug materials absorb large amount of water and high amount of bacteria will reside inside the pile and construction of the rug. Water damage can provide the necessary conditions for mold growth in Martindale  TX. Water damage cause several damages within hours or even minutes. Water damage will give you an unhealthy environment.

Mold Mitigation

When you face theses type of situations in Martindale Texas the first thing that you should take care of is that you shouldn’t panic. The latest technologies can help you if flood damage occurs from flooding, broken water pipes, or any other source. Emergency water extraction from carpets, floor covering and remediation of mold can be easily done as technology had changed a lot and lot different from the conventional carpet cleaning mechanisms.

Martindale Mold Inspection company

Mold is part of the fungi kingdom and reproduces by means of microscopic spores. Mold spores waft through the indoor and outdoor air continually. When mold spores land on a damp spot indoors, they may begin growing and digesting whatever they are growing on in order to survive. There are molds that can grow on wood, paper, carpet and foods. When excessive moisture or water accumulates indoors, mold growth will often occur, particularly if the moisture problem remains undiscovered or unaddressed. Indoors, there is always a food source for mold to grow on: carpet, drywall, paint, wood, wallpaper, fabrics. However, mold won't grow without moisture.

o Fix leaks and seepage. If water is entering the house from the outside, your options range from simply removing landscaping and irrigation heads near your slab to extensive excavation and waterproofing. Check the ground around your foundation - it should slope away from your house. When it rains (or should I say if?) does water run off your roof in certain area and run toward your home? Gutters would be a good solution. Water leaks in pipes or around tubs and sinks can provide a place for biological pollutants to grow.

o If you have a crawlspace under your home or condominium building, make sure it is well-ventilated.

How would you know if your home has mold problems? The "Duck" Test: use your eyes and your nose. You know the saying, "if it walks like a duck and quacks like a duck, then it must be a duck?" Well, if you can see mold, or if you can smell mold (an earthy, musty smell), then a mold problem is likely to exist.

Restoration technicians are trained to measure and provide documentation to show that the unit has been dried properly. The final documentation includes a psychrometry log, a moisture content log, a drying calculation work sheet and an equipment dehumidifier requirement worksheet. Restoration technicians document the drying process using thermo-hygrometers which allow them to measure the moisture in the air, or specific humidity.

A guaranteed drying time in just three days can be achieved by using the following techniques:

o Extraction: Extracting water quickly is the key to drying an area properly.
o Air Movement / Evaporation: Air movement will turn water into vapor and is used in conjunction with humidity and temperature control.
o Dehumidification: Humidity is measured in grains per pound of air. Various dehumidification tools may be used depending on the conditions.
o Temperature Control: Managing the temperature ensures the complete drying of wet building materials and allows dehumidifiers to work efficiently.

These alternative drying methods allow water losses to be dried in the shortest time. This will help minimize the cost - not only in the cost of the equipment being on site but for the electricity to run the equipment.

Mold Removal Companies

Hidden Mold: The Danger Lurking Behind The Walls

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration

Air Duct Cleaning

Bleach For Mold Remediation - Good Or Bad Decision?

From the dawn of time mold has been on this planet. It comes in a variety of forms and colors and is caused by fungus growth. The spores of mold can cause the spread of this organism and certain factors can spur its growth. Mold needs a source of food, dampness, humidity and the spores themselves to be able to evolve.

Mold is present outdoors as well as inside. Typical places that mold grows are ceilings, wallpaper, wood, painted areas and carpets. It is quite normal to find it in places such as the basement or the bathroom. A few types of mold can be toxic and therefore dangerous to human health; this is the best reason to eradicate the problem. People can develop allergies to mold and many of the symptoms of suffering from the effects of mold include a runny nose, sneezing, itchy and red eyes as well as headaches.

There are easy ways in which you can rid your property of mold. In fact something as common and ordinary as vinegar can be used to get rid of mold. You can use a bottle to spray the vinegar directly onto the affected areas like grout in tiles, shower cubicles and the seals on faucets. Mold can grow anywhere in the home so remember to check all areas thoroughly- that unused kitchen cabinet with its food remnants and dampness will be a perfect place for mold to form.

A portable air conditioner is a handy utensil to have. During the hot and humid weather it will help to stop mold growing in your home. The humidity of your property should be kept at approximately 30%-50% to be productive.

In the winter months when it is colder, a dehumidifier is a great asset in the fight against the formation of mold in the home. Again, the humidity level should be maintained around the 30%-50% mark, but should still be at a pleasant level for your room temperature.

One of the commonest places to find mold is in the carpet. If you find that mold has settled on your carpet there are basically two options; you can replace the carpet with wooden flooring, or treat the carpet with baking soda. Leave the baking soda to sit on the carpet for a few hours and then vacuum off.

If the influx of mold is serious, then it may be best to consider calling the professionals to deal with the problem. An assessor can visit your home and identify the type of mold growing. Then a team will use tools such as wet vacuums, dry wipe materials and HEPA vacuums to eradicate the problem. There is a slight possibility that any lingering mold spores in the air may cause it to return, in which case a second treatment may be needed.

There is a serious element to mold being in your home and it should be considered an immediate problem, due to the possible risks to your health. As soon as you spot that mold forming tackle the problem quickly and head on.

Mold Home Inspection

Asthma and Allergies - Hidden Mold Can Affect Your Asthma Or Allergies

Molds, mildews and fungi can be found everywhere, indoors or outdoors. They can be found in just about any household object and even in the air we breath. Molds love humid and dark places that lack circulating air, they can grow rapidly in such environments.

Many types of molds, mildews and fungi are not very harmful. In the case of Penicillium they have even been life saving. There is a dark side though. A number of molds can be dangerous to your health. The EPA estimates that there are about 50-100 types of household mold that can potentially create health problems.

These problems include; allergic reactions, asthma attacks, flu-like symptoms, migraines and much more. Some studies have shown that mold can even be linked to nervous and immune system complications that have resulted in death.

Mold is a serious problem and preventative measures may be the best way of ensuring your health. These 5 tips will kick start your mold defense.

1. Use a Dehumidifier - Dehumidifying units are reasonably priced these days and should be used in the damp areas of your house. If you have a humidity in the 60% range (or higher) you should consider using a dehumidifier. It will help clear the air of moisture, and mold needs moisture to propagate. If you decide to use a dehumidifier remember to change the water frequently, and disinfect the unit to make sure it doesn't become mold infested itself.

2. Stay on Top of Your Cleaning - Anywhere that is dirty, moist and dungy is a good breeding ground for mold. If you have spots like this around your house, make sure to diligently clean them. A quick wipe isn't enough - scrub with a water and bleach combination to really prevent mold from forming. Make sure you are properly ventilated when using such chemicals.

3. Improve Air Circulation - Certain areas in your house traditionally suffer from poor air circulation. Places like the attic, basement and closets are the most likely spots. There are ways to make sure the air keeps circulating. Install ceiling fans in the basement, install vented doors on closets and make sure you have an adequate number of roof vents in the attic. Make sure the air keeps circulating all over your house. This can help stop mold from beginning to grow.

4. When Spills or Leaks Occur: Act Quickly - One of the most effective ways to make sure mold doesn't begin forming in your house is to act quickly when leaks, floods or spills happen. If wet materials or areas are dried within 24-48 hours, it is most likely that mold wont even begin to form! Dry areas quickly and properly. If some object or material isn't going to dry quick enough, remove it or replace it.

5. If All Else Fails: Call in a Pro - Most towns have some sort of cleaning and/or restoration company that is designed to deal with these problems. If you suspect a serious mold problem in your house - contact them. They have the tools, knowledge and safety equipment to deal with serious mold problems. They can properly assess and treat the threat. Make sure you get recommendations and that the company is insured.

If you follow the first four steps, you may never need the fifth. If mold does become a huge problem though, don't ignore it. If you see a lot of mold, that is a sign there may be A LOT more that you can not see - that is when you need to have a professional come in.

Mold can be prevented, and in worst case scenarios it can be removed and your house restored. For More Info on the Dangers of Mold:

Highland Restoration


Mold Testing