Mold Cleaning Lakeway

How much does Mold Cleaning Lakeway cost?

The cost for mold removal will differ dependent upon many factors, for example, what number of square feet of mold was discovered, was asbestos tried and comes about were sure, is lead paint an issue, does it stretch out in behind kitchen or restroom cupboards, can the region be sealed off effectively, is there a great deal of materials to be cleaned and disinfected, has additional damage happened because of the mold damage, and so on. With such a large number of factors, it is exceptionally difficult to nail down a cost unless an expert evaluation has been.

The greatest concern a mold remediation is containing the mold and setting a negative pressure environment to prevent further contamination. The use of HEPA filtration units are essential in ensuring the health of workers and building tenants. The reason this is so imperative is that individuals are more inclined to health concerns when exposed to specific species as well as vast amounts of mold spores and amid the removal procedure the spores become airborne.

  1. Distinguish the cause of the mold growth
  2. Decide whether moisture source has been removed
  3. Determine the type of mold

Ordinarily, a private mold assessment will cost from $350 to $2000. Business mold assessments will commonly go from $750-$5,000.

The three most critical factors in deciding a definitive cost of a mold remediation venture are the accompanying:

  1. What amount of the house or business has mold?
  2. What sort of materials is contaminated?
  3. How simple is it to get to the mold?

Mold remediation undertakings can extend from two or three thousand dollars over ten thousand dollars.  The mold remediation undertaking will run from $1,700 to $9,000 while most business ventures are typically more. On the off chance that asbestos containing materials are found to be present the cost will  rise. You shouldn’t simply run with the least expensive quote, enlist the firm that will do the best mold removal and guarantee that the activity is done well and remain behind their work!

Best Tips for Mold Cleaning Lakeway

Mold is part of the fungi kingdom and reproduces by means of microscopic spores. Mold spores waft through the indoor and outdoor air continually. When mold spores land on a damp spot indoors, they may begin growing and digesting whatever they are growing on in order to survive. There are molds that can grow on wood, paper, carpet and foods. When excessive moisture or water accumulates indoors, mold growth will often occur, particularly if the moisture problem remains undiscovered or unaddressed. Indoors, there is always a food source for mold to grow on: carpet, drywall, paint, wood, wallpaper, fabrics. However, mold won't grow without moisture.

o Fix leaks and seepage. If water is entering the house from the outside, your options range from simply removing landscaping and irrigation heads near your slab to extensive excavation and waterproofing. Check the ground around your foundation - it should slope away from your house. When it rains (or should I say if?) does water run off your roof in certain area and run toward your home? Gutters would be a good solution. Water leaks in pipes or around tubs and sinks can provide a place for biological pollutants to grow.

o If you have a crawlspace under your home or condominium building, make sure it is well-ventilated.

How would you know if your home has mold problems? The "Duck" Test: use your eyes and your nose. You know the saying, "if it walks like a duck and quacks like a duck, then it must be a duck?" Well, if you can see mold, or if you can smell mold (an earthy, musty smell), then a mold problem is likely to exist.

Restoration technicians are trained to measure and provide documentation to show that the unit has been dried properly. The final documentation includes a psychrometry log, a moisture content log, a drying calculation work sheet and an equipment dehumidifier requirement worksheet. Restoration technicians document the drying process using thermo-hygrometers which allow them to measure the moisture in the air, or specific humidity.

A guaranteed drying time in just three days can be achieved by using the following techniques:

o Extraction: Extracting water quickly is the key to drying an area properly.
o Air Movement / Evaporation: Air movement will turn water into vapor and is used in conjunction with humidity and temperature control.
o Dehumidification: Humidity is measured in grains per pound of air. Various dehumidification tools may be used depending on the conditions.
o Temperature Control: Managing the temperature ensures the complete drying of wet building materials and allows dehumidifiers to work efficiently.

These alternative drying methods allow water losses to be dried in the shortest time. This will help minimize the cost - not only in the cost of the equipment being on site but for the electricity to run the equipment.

Mold Home Inspection

Interesting Facts About Mold Cleaning Lakeway

In order to remove bathroom mold, you will need a solution that can remove the source of the black mold. When cleaning mold and mildew, you have to observe the perimeter wall and also look for any sources of moisture. If you have black mold and mildew in your bathroom, it is most likely causing a problem with you and your family. By having these toxins which the spores produce, it will cause serious mold health effects. When removing mold, you will have to be sure to remove the source of the problem. Since mold and mildew are attracted to moisture and also need something to eat, you will have to find these sources. In more times than most, black mold and mildew grows on the wall because the wall is a building material which is a food source. When you have a high humidity value inside the areas of the bathroom, you will see dark spots of the black mold growing.

If you were to live with black mold in your house, you would feel some signs and symptoms of the toxins which the black mold delivers. These symptoms are caused from the excrement of the mold and mildew. Excrement is really the digestion of the mold and mildew. After eating off the walls of the home, the black mold delivered excrement which is toxic. Thus, while you and your family have mold issues.

In order to effectively remove the spores of the mold, you will need to find the source of the problem. If you have a water leak or some type of moisture intrusion, then you will need to find the source of this problem. By just removing the mold on the walls, and ignoring the source of the problem, you will still have a mold problem guaranteed. What mold inspections are about is finding the source of the problem. If you are clever enough to know there is a moisture problem you can then go ahead and attack the area using a natural cleaning product. Be sure when using natural cleaning products that they are strong enough to remove black mold effectively. Natural cleaning products are all about using regular household ingredients, but will effectively remove and prevent mold and mildew. The challenge with most green cleaning products is that they are not tough enough to destroy mold and mildew. Let me give you an example, most people will use bleach to remove the spores of the mold and mildew. But what happens here, is the mold is only removed temporarily. By using bleach you are only removing the topical surface of the problem. It is not attacking the source or changing the DNA make up of the mold and mildew. There is a natural ingredient out there which cleans mold and mildew and also creates a barrier to prevent mold growth.

By removing mold spores effectively, you will need to make sure the source is controlled. In order to control the source of the problem with mold. You will need a solution that creates a clear barrier or shield from you and the mold. This process is called an encapsulate. The encapsulate is a way which mold and mildew will suffocate because there is no source of food allowed. By protecting the walls of your bathroom, walls of your house, and other building materials, you have an ability to prevent the growth of mold and mildew. The challenge with black mold and mildew is taking away the source of the problem. Using bleach will only remove mold temporarily. If you are serious and have bathroom mold on your walls and in your house, then you need a strong natural cleaning product to kill mold. The natural cleaning product should be organic due to the harsh chemicals in other cleaning products. Have a look at Safe Shield to use as an effective natural cleaning product against mold and mildew. Safe Shield is also an organic solution and combined with Molderizer, it is a strong combination to effectively remove black mold and also prevent it from coming back. To increase the indoor air quality of your home, try an organic cleaning solution that will remove and prevent mold from ever coming back.

Mold Under House

How do I hire a Mold Cleaning Lakeway Company?

There is now a lot of evidence to connect black mold with Sudden Infant Death Syndrome (SIDS) and miscarriage. The death of an infant can be devastating for a family so can losing a baby due to miscarriage. It is vital that any steps needed to prevent these awful events should be taken.

It is not just the fact that black mold is toxic that means that it is dangerous to infants. One way that it is believed to work is that black mold spores end up in baby's mattress and they releases harmful chemicals from the mattress into the air and the baby breathes this lethal gas. This process is believed to be responsible for many cases of SIDS.

Black mold has also been associated with miscarriage. It seems that exposure to mold toxin could be the cause of many women losing their baby during pregnancy. Not all mold is toxic, but it is almost impossible to tell this by just looking. The usual way to determine toxicity is by sending the mold to be tested in a laboratory. This is why it is probably a good idea that pregnant women treat all mold as if it were toxic and keeping well away from it.

The best way to stop black mold from becoming an issue for infants and those who are pregnant is to prevent it occurring in your home, and if you do have it to quickly eliminate the problem. This can be a difficult issue for those who are living in rented accommodation and have a landlord who just won't do anything about your mold problem. The advice here is to find somewhere else to stay either permanently or until the problem is fixed.

The real danger comes when black mold is growing and you are not even aware of it. Mold likes damp places that are poorly ventilated so make sure you check your attic and basement and any other cubby holes. Of course, if you are pregnant you will want someone else to conduct this search for you. In most instances eradicating the mold will be fairly straight forward so long as you discover it all. Pregnant women should not be involved in any part of the cleaning up process, but be kept well away from the area in case toxic spores are released into the air. When the mold is completely removed you will then need to take measures to make sure it doesn't back again.

How Much Does Air Duct Cleaning Cost

Which Mold Cleaning Lakeway service provider is performs 24/7 water damage services?

Fungi such as the Stachybotrys mold produce secondary metabolites such as antibiotics (e.g., penicillin), mycotoxins, and those that produce the acrid, musty smell characteristic of mold growth.

It's important to test for mold in your home because most symptoms of black mold illnesses are closely similar to sinusitis symptoms and may therefore be pooh-poohed by some physicians. They'll prescribe decongestants to relieve your stuffy nose or perhaps recommend syrups to alleviate the coughing, but if these are due to the Stachybotrys mold, then you're barely scratching the surface.

Apart from the symptoms that the non-toxic mold can cause in a person, the Stachybotrys mold effects severe, often long-term effects on the victim. Nausea and vomiting have been reported by patients, and this is because the mold can work its way to the digestive system.

Of course, the cleanup doesn't come with the inspection. If the results are positive, you would have to hire the services of a separate cleanup team. The work all this entails could easily chalk up several hundred dollars, but if you care about your health, then you shouldn't be worrying about the cost. Besides, tackling the problem would early on would nip the problem in the bud, so to speak.

You may alternatively want to purchase a mold inspection kit to check for the presence of the Stachybotrys mold yourself. These kits include high-tech mold testing films to check for contamination in the air or on surfaces. Apart from the films, kits normally have mold detection and cleaning guides, test kit instructions, and a screening kit.

Is Air Duct Cleaning Necessary


Lakeway

For More Information on Mold Cleaning Lakeway

 

Mold Cleaning Lakeway

How much does Mold Cleaning Lakeway cost?

The cost for mold removal will differ dependent upon many factors, for example, what number of square feet of mold was discovered, was asbestos tried and comes about were sure, is lead paint an issue, does it stretch out in behind kitchen or restroom cupboards, can the region be sealed off effectively, is there a great deal of materials to be cleaned and disinfected, has additional damage happened because of the mold damage, and so on. With such a large number of factors, it is exceptionally difficult to nail down a cost unless an expert evaluation has been.

The greatest concern a mold remediation is containing the mold and setting a negative pressure environment to prevent further contamination. The use of HEPA filtration units are essential in ensuring the health of workers and building tenants. The reason this is so imperative is that individuals are more inclined to health concerns when exposed to specific species as well as vast amounts of mold spores and amid the removal procedure the spores become airborne.

  1. Distinguish the cause of the mold growth
  2. Decide whether moisture source has been removed
  3. Determine the type of mold

Ordinarily, a private mold assessment will cost from $350 to $2000. Business mold assessments will commonly go from $750-$5,000.

The three most critical factors in deciding a definitive cost of a mold remediation venture are the accompanying:

  1. What amount of the house or business has mold?
  2. What sort of materials is contaminated?
  3. How simple is it to get to the mold?

Mold remediation undertakings can extend from two or three thousand dollars over ten thousand dollars.  The mold remediation undertaking will run from $1,700 to $9,000 while most business ventures are typically more. On the off chance that asbestos containing materials are found to be present the cost will  rise. You shouldn’t simply run with the least expensive quote, enlist the firm that will do the best mold removal and guarantee that the activity is done well and remain behind their work!

Best Tips for Mold Cleaning Lakeway

  (Redirected from Mold growth, assessment, and remediation)

Mold (American English) or mould (British English) is part of the natural environment. Outdoors, molds play a part in nature by breaking down dead organic matter such as fallen leaves and dead trees; indoors, mold growth should be avoided. Molds reproduce by means of tiny spores. The spores are invisible to the naked eye and float through the air. Mold may begin growing indoors when spores land on moist surfaces. There are many types of mold, but all require moisture for growth.

Molds are ubiquitous, and mold spores are a common component of household and workplace dust. In large amounts they can be a health hazard to humans, potentially causing allergic reactions and respiratory problems.

Some molds produce mycotoxins that can pose serious health risks to humans and animals. "Toxic mold" refers to molds which produce mycotoxins, such as Stachybotrys chartarum.[1] Exposure to high levels of mycotoxins can lead to neurological problems and death. Prolonged exposure (for example, daily exposure) can be particularly harmful.

Symptoms of mold exposure may include nasal and sinus congestion; runny nose, eye irritation; itchy, red, watery eyes, respiratory problems, such as wheezing and difficulty breathing, chest tightness, cough, throat irritation, skin irritation (such as a rash), headache, and persistent sneezing.[2]

Infants may develop respiratory symptoms as a result of exposure to Penicillium, a fungal genus. Signs of mold-related respiratory problems in an infant include a persistent cough or wheeze. Increased exposure increases the probability of developing respiratory symptoms during the first year of life. Studies have indicated a correlation between the probability of developing asthma and exposure to Penicillium.[3]

Mold exposure has a variety of health effects, and sensitivity to mold varies. Exposure to mold may cause throat irritation, nasal stuffiness, eye irritation, cough and wheezing and skin irritation in some cases. Exposure to mold may heighten sensitivity, depending on the time and nature of exposure. People with chronic lung diseases are at higher risk for mold allergies, and will experience more severe reactions when exposed to mold. Damp indoor environments correlate with upper-respiratory-tract symptoms, such as coughing and wheezing in people with asthma.[4]

Molds are found everywhere, and can grow on almost any substance when moisture is present. They reproduce by spores, which are carried by air currents. When spores land on a moist surface suitable for life, they begin to grow. Mold is normally found indoors at levels which do not affect most healthy individuals.

Because common building materials are capable of sustaining mold growth and mold spores are ubiquitous, mold growth in an indoor environment is typically related to water or moisture and may be caused by incomplete drying of flooring materials (such as concrete). Flooding, leaky roofs, building-maintenance or indoor-plumbing problems can lead to interior mold growth. Water vapor commonly condenses on surfaces cooler than the moisture-laden air, enabling mold to flourish.[5] This moisture vapor passes through walls and ceilings, typically condensing during the winter in climates with a long heating season. Floors over crawl spaces and basements, without vapor barriers or with dirt floors, are mold-prone. The "doormat test" detects moisture from concrete slabs without a sub-slab vapor barrier.[6] Some materials, such as polished concrete, do not support mold growth.

Significant mold growth requires moisture and food sources and a substrate capable of sustaining growth. Common building materials, such as plywood, drywall, furring strips, carpets, and carpet padding provide food for mold. In carpet, invisible dust and cellulose are food sources. After water damage to a building, mold grows in walls and then becomes dormant until subsequent high humidity; suitable conditions reactivate mold. Mycotoxin levels are higher in buildings which have had a water incident.[7]

Although this home experienced minor exterior damage from Hurricane Katrina, small leaks and inadequate airflow permitted mold infestation.

Mold is detectable by smell and signs of water damage on walls or ceiling, and can grow in places invisible to the human eye. It may be found behind wallpaper or paneling, on the inside of ceiling tiles, the back of drywall, or the underside of carpets or carpet padding. Piping in walls may also be a source of mold, since they may leak (causing moisture and condensation).[8]

Spores need three things to grow into mold: nutrients - cellulose (the cell wall of green plants) is a common food for indoor spores; moisture - To begin the decaying process caused by mold; time -mold growth begins from 24 hours to 10 days after the provision of growing conditions.

Mold colonies can grow inside buildings, and the chief hazard is the inhalation of mycotoxins. After a flood or major leak, mycotoxin levels are higher even after a building has dried out.[7]

Food sources for mold in buildings include cellulose-based materials such as wood, cardboard and the paper facing on drywall and organic matter such as soap, fabrics and dust-containing skin cells. If a house has mold, the moisture may originate in the basement or crawl space, a leaking roof or a leak in plumbing pipes. Insufficient ventilation may accelerate moisture buildup. Visible mold colonies may form where ventilation is poorest and on perimeter walls (because they are nearest the dew point).

If there are mold problems in a house only during certain times of the year, the house is probably too airtight or too drafty. Mold problems occur in airtight homes more frequently in the warmer months (when humidity is high inside the house, and moisture is trapped), and occur in drafty homes more frequently in the colder months (when warm air escapes from the living area and condenses). If a house is artificially humidified during the winter, this can create conditions favorable to mold. Moving air may prevent mold from growing, since it has the same desiccating effect as low humidity. Molds grow best in warm temperatures, 77 to 86 °F (25 to 30 °C), although growth may occur between 32 and 95 °F (0 and 35 °C).[9]

Removing one of the three requirements for mold reduces (or eliminates) new mold growth: moisture; food for the mold spores (for example, dust or dander); and warmth since mold generally does not grow in cold environments.

HVAC systems can produce all three requirements for mold growth. The air conditioning system creates a difference in temperature, encouraging condensation. The high rate of dusty air movement through an HVAC system may furnish ample food for mold. Since the air-conditioning system is not always running, warm conditions are the final component for mold growth.

The first step in assessment is to non-intrusively determine if mold is present by visually examining the premises; visible mold helps determine the level of remediation necessary. If mold is actively growing and visibly confirmed, sampling for its specific species is unnecessary.[8]

Intrusive observation is sometimes needed to assess the mold level. This includes moving furniture, lifting (or removing) carpets, checking behind wallpaper or paneling, checking ventilation ductwork and exposing wall cavities. Detailed visual inspection and the recognition of moldy odors should be used to find problems. Efforts should focus on areas where there are signs of liquid moisture or water vapor (humidity), or where moisture problems are suspected.

The United States Environmental Protection Agency (EPA) does not generally recommend sampling unless an occupant of the space has symptoms. Sampling should be performed by a trained professional with specific experience in mold-sampling protocols, sampling methods and the interpretation of findings. It should be done only to make a particular determination, such as airborne spore concentration or identifying a particular species. Before sampling, a subsequent course of action should be determined.

In the U.S., sampling and analysis should follow the recommendations of the Occupational Safety and Health Administration (OSHA), National Institute for Occupational Safety and Health (NIOSH), the EPA and the American Industrial Hygiene Association (AIHA).

Types of samples include air, surface, bulk, and swab. Air is the most common form of sampling to assess mold levels. Indoor and outdoor air are sampled, and their mold-spore levels compared. Air sampling often identifies hidden mold. Surface sampling measures the number of mold spores deposited on indoor surfaces, collected on tape or in dust. Bulk removal of material from the contaminated area is used to identify and quantify the mold in the sample. With swab, a cotton swab is rubbed across the area being sampled, often a measured area, and subsequently sent to the mold testing laboratory. Final results indicate mold levels and species located in suspect area.

Multiple types of sampling are recommended by the AIHA, since each has limitations; for example, air samples will not identify a hidden mold source and a tape sample cannot determine the level of contamination in the air.[10]

Mold remediation

The first step in solving an indoor mold problem is to remove the moisture source;[11] new mold will begin to grow on moist, porous surfaces within 24 to 48 hours. There are a number of ways to prevent mold growth. Some cleaning companies specialize in fabric restoration, removing mold (and mold spores) from clothing to eliminate odor and prevent further damage to garments.

The effective way to clean mold is to use detergent solutions which physically remove mold. Many commercially available detergents marketed for mold cleanup include an EPA-approved antifungal agent.[12]

Significant mold growth may require professional mold remediation to remove the affected building materials and eradicate the source of excess moisture. In extreme cases of mold growth in buildings, it may be more cost-effective to condemn the building than to reduce mold to safe levels.[13]

The goals of remediation are to remove (or clean) contaminated materials, preventing fungi (and fungi-contaminated dust) from entering an occupied (or non-contaminated) area while protecting workers performing the abatement.[14]

The purpose of cleanup is to eliminate mold and remove contaminated materials. Killing mold with a biocide is insufficient, since chemicals and proteins causing reactions in humans remain in dead mold. The following methods are used.

Equipment used in mold remediation includes: moisture meter: measures drying of damaged materials; Humidity gauge: often paired with a thermometer; borescope: Camera at the end of a flexible snake, illuminating potential mold problems inside walls, ceilings and crawl spaces; digital camera: Documents findings during assessment; personal protective equipment (PPE): Respirators, gloves, impervious suit, and eye protection; thermographic camera: Infrared thermal-imaging cameras identify secondary moisture sources.

During mold remediation in the U.S., the level of contamination dictates the protection level for remediation workers.[16] Contamination levels have been enumerated as I, II, III, and IV:[17]

After remediation, the premises should be reevaluated to ensure success.

According to the EPA, residential mold may be prevented and controlled icy cleaning and repairing roof gutters, to prevent moisture seepage into the home; keeping air-conditioning drip pans clean and drainage lines clear; monitoring indoor humidity; drying areas of moisture or condensation and removing their sources; treating exposed structural wood or wood framing with an EPA-approved fungicidal encapsulation coating after pre-cleaning (particularly homes with a crawl space, unfinished basement or a poorly-ventilated; attic).[8]

Mold Inspection Cost

Interesting Facts About Mold Cleaning Lakeway

A ductwork system is a network of tubes in your walls, floors, and ceiling s that transports the air from your furnace and/or central air conditioner to each individual room in your house. This network is made of sheet metal, fiberglass, or other materials. Most ductwork systems that have not been modernized could be eating up your energy bills.

Many of these systems are poorly insulated or not insulated at all. This is what raises your energy bill each month. If you are purchasing a new duct system, think about buying one that already has insulation installed. If you're insulating a duct, make sure it's in an unconditioned space.

The following is a list of helpful information in order for you to repair small duct damages; along with other miscellaneous tips:

o Inspect your ducts first and check for air leaks. Start looking for tubes that should be joined, but are obviously separated, and then move to the obvious holes.

o If you want to use duct tape to fix the ducts, make sure you're using the type with Underwriters Laboratories (UL) emblem on it. This kind of tape will decrease the amounts of cracks associated with aging.

o If you're insulating ducts in the basement, keep in mind that it will make your basement cooler.

o If you're using the basement as a living area, install the supply and registers in the rooms in the basement.

o In order to prevent moisture buildup on cooling ducts, make sure there's a well sealed vapor barrier.

o Consult professional help if you are in doubt with repairing ducts.

When ducts are losing heat because of poor insulation, this wastes energy, along with spending more of your money on the energy bill.

Mold Mitigation

How do I hire a Mold Cleaning Lakeway Company?

I maintain a few health related websites, one of which discusses the benefits of air purifiers as well as de-humidifiers and I have done extensive research on mold. I thought it would be appropriate to share them here as the content included some lesser known facts about black mold removal.

According to my research and against the common belief that Stachybotrys is a toxic strain of mold, surprisingly though, it is not deemed as a lethal species. They are the black mold found on your leaky plumbing, toilets, wall sidings, ceiling and roof tops, flooring, even on your carpets at times. You might be relieved to know that contrary to common belief, Stachybotrys is a mold strain not as lethal as the infamous Aspergillus which is proven toxic. Often in homes, both exist side by side. Although the former grows faster during the first week or so, the latter strain is a more robust species and often overwhelms the former.

To help you recognize Stachybotrys, they are black, the tiny colonies with brownish surroundings. You should never use chlorine bleach to scrub and clean out the mold, as they are incapable of killing the mold at its roots. Chlorine bleach should not be used in black mold removal as stated by OSHA's mold remediation guidelines.

Mold Wood

Which Mold Cleaning Lakeway service provider is performs 24/7 water damage services?

Mold & Moisture

The crawl space is the number one source for potential moisture entering your home. The moisture may be equal to gallons of water but in vapor form and not even visible. A seal tight liner kit will instantly stop the moisture in the crawl space from entering home as well as eliminating radon gas, musty odors, mildew and mold.

"The U.S. EPA states: "Molds are usually not a problem unless mold spores land on a wet or damp spot and begin growing. Molds produce allergens, irritants and potentially toxic substances. The key to mold control is moisture control. The mold will not grow if moisture is not present (source: EPA " A Brief Guide to Mold, Mildew and Your Home," publication #402-K-02-003)."

Eliminate the Existing Mold

To eliminate and prevent future mold growth, spray the affected areas with a mold killing and growth preventing spray, there are good products for purchase at your local building supply house.

My Take on the Problems with Bleach

The Myth Of Using Bleach To Kill Mold! Mold has a root system that actually grows into the surfaces of wood, drywall, concrete, etc..., like tree roots grow into the soil. The roots are not killed by bleach alone because the bleach does not penetrate the surface of porous materials. The bleach chemical portion sits on the surface until gassing off, killing only the mold on the surface leaving the roots intact, while the water portion of the bleach soaks into the material giving the mold roots a food source to start growing again. Think of it this way, if you were to cut a tree, plant, grass, or anything that has roots down and you water the area, you will see what you cut start to grow again. This is because the roots were not killed. The other problem with using bleach for an extended period is that if sprayed on wood and other building materials it actually starts to break down the products.

STOPPING MOLD AT THE ROOTS IS THE ONLY WAY!!!

Chlorine Bleach is NOT a registered EPA Mold Killing product!

If you think that we're just knocking bleach. Don't take our word for it! Go to http://epa.gov/mold/moldcourse/index.html and read what the EPA has to say about using bleach to kill mold. The EPA says that "The use of bleach is not recommended as a routine practice during mold clean-up" http://iaq.custhelp.com question #7.

Now you might ask: How do I kill mold if not with bleach?

Answer: Use an EPA approved and registered fungicide to kill the mold at its roots.

Mold Mitigation


Lakeway

For More Information on Mold Cleaning Lakeway