Learn More: Point Venture Mold Removal Company Services
There may be many times when indoor mold growth may be difficult to find. It can be hidden behind walls, under surfaces, and inside unreachable areas where the visibility is almost impossible. Just because it’s invisible doesn’t mean it’s undefeatable, however. Here’s how to spot hidden mold dangers and make your home a little more livable in this toxin filled world.
One of the most common indications that you may have invisible mold growing in your home is a water leak. If you’ve had any recent flooding, roof damage or a plumbing leak, you may have a mold problem. Look around the areas where the leak occurred for moisture.
If you still can’t find the source of the problem, you may want to call on a Point Venture professional to help you find any hidden mold dangers in your home. This may seem like an expensive alternative, but remember that mold can turn into a serious problem if they are not resolved quickly. It’s always better to be safe than sorry.
Learn More: Point Venture Mold Remediation Company Services
Water damage can come from many different sources in your home or business. From a simple roof leak to serious weather conditions such as hurricanes can give you flood damage to your house. When flood damage happens, rug materials absorb large amount of water and high amount of bacteria will reside inside the pile and construction of the rug. Water damage can provide the necessary conditions for mold growth in Point Venture TX. Water damage cause several damages within hours or even minutes. Water damage will give you an unhealthy environment.
When you face theses type of situations in Point Venture Texas the first thing that you should take care of is that you shouldn’t panic. The latest technologies can help you if flood damage occurs from flooding, broken water pipes, or any other source. Emergency water extraction from carpets, floor covering and remediation of mold can be easily done as technology had changed a lot and lot different from the conventional carpet cleaning mechanisms.
Point Venture Mold Inspection company
A ductwork system is a network of tubes in your walls, floors, and ceiling s that transports the air from your furnace and/or central air conditioner to each individual room in your house. This network is made of sheet metal, fiberglass, or other materials. Most ductwork systems that have not been modernized could be eating up your energy bills.
Many of these systems are poorly insulated or not insulated at all. This is what raises your energy bill each month. If you are purchasing a new duct system, think about buying one that already has insulation installed. If you're insulating a duct, make sure it's in an unconditioned space.
The following is a list of helpful information in order for you to repair small duct damages; along with other miscellaneous tips:
o Inspect your ducts first and check for air leaks. Start looking for tubes that should be joined, but are obviously separated, and then move to the obvious holes.
o If you want to use duct tape to fix the ducts, make sure you're using the type with Underwriters Laboratories (UL) emblem on it. This kind of tape will decrease the amounts of cracks associated with aging.
o If you're insulating ducts in the basement, keep in mind that it will make your basement cooler.
o If you're using the basement as a living area, install the supply and registers in the rooms in the basement.
o In order to prevent moisture buildup on cooling ducts, make sure there's a well sealed vapor barrier.
o Consult professional help if you are in doubt with repairing ducts.
When ducts are losing heat because of poor insulation, this wastes energy, along with spending more of your money on the energy bill.
Before a person ever decides to search for the best mold inspection company in their area, they should first know a few facts:
1. In the author's opinion, every house on the planet has mold in it. Mold is a member of the Fungi family and exists naturally in our environment. It is airborne and enters our houses whenever a door or window is open and in numerous other ways.
2. Inside of a house, mold will not be a problem unless it has been exposed to water for more than 48-72 hours. So, if you have seen, or know of evidence of water inside your house and you suspect that it has been there for at least 48 hours, you are most certain to have harmful (toxic) mold.
3. Even if you can't see any water, it still may be lurking behind your walls, sinks, or tubs; perhaps under windows or other locations. If you can smell a musty or unpleasant odor (some in the family may detect it while others can't), you have a harmful mold problem.
4. If you or other members of your house have asthma, other respiratory problems, coughing, runny nose or eyes, headaches, or tend to feel much better when you are away from the house and worse when you are in it, you almost certainly have a mold problem.
Knowing that you likely have a mold problem but not knowing what to do next, speaks volumes in favor of hiring a professional. But which one? You could likely have several mold inspection companies to chose from on sites like Yahoo or Google; but how does a homeowner find the best one for their needs?
My advice is: First I recommend that the company specializes in mold. Not mold and/or radon, lead, air ducts, etc. Next, I recommend that they have both education and experience at least equal to or better than their competitors. While most every state requires that home inspectors be licensed, only two states require so of mold inspectors.Are they certified? This would tell you that they cared enough about their profession to acquire knowledge and training to meet standards. Experience counts. How long has the inspector been certified? How many jobs have they performed? Not just the company, but the individual inspector? Can they get references? Have they been cited by the Better Business Bureau for any deceptive, misleading, or dishonest practices?
The next criteria is critical: Are they also in the business of mold remediation or removal? If they are it could be a blatant conflict of interest. Wouldn't it be to there interest to overstate the level of mold problems and/or the amount of remediation needed if they were in line to pick up a job worth several thousands of dollars? Therefore, I recommend that you find a professional who only inspects for mold.
OK, so now how should your inspector look for and find your problem? When they are finished will they be able to tell you for certain where your mold is and why you have the problem? Isn't that how you would like to spend your money?
Testing for mold is most often done by the old fashioned method called air testing. This procedure sucks air into a machine that then traps it into a laboratory testing dish, which in turn gets sent to a laboratory for culturing. This process can take a week or more for the results. When air testing is performed, the inspector should always take one test outside of the house in order to determine a benchmark as to what mold(s) are prevalent in your area. They then will try to take as many tests inside of the house as the customer can afford. In most areas of the country, these tests cost about $100 each. Some of the problems with air testing are:
1. The more tests that are performed, the more costly the job.
2. Air testing is highly inaccurate. All it can do is to tell you what was in the air at that location at that moment in time. Results can vary widely over time and method used. Airborne fungal spore concentrations vary greatly over the course of hours, days, weeks, and seasons.
3. In colder climates when there is snow on the ground, the results of the outside test will be useless in that spore count is greatly or totally reduced. I have yet to hear that a customer was told this fact.
4. There are no numerical standards to which tests can be prepared, making interpretation difficult.
5. Even the best tests can not determine how much exposure people in the house have had in the past.
6. Fungal air tests are expensive.
7. Results are slow to receive.
8. Knowing the type of mold does not change the way that you would respond. All mold that is active, or was active, is bad mold.
Then what does represent a professional, accurate, and helpful mold inspection? The most intelligent inspections should: Find all mold. Determine the cause; i.e. Where is the water problem(s). Explain how to fix the problem(s).
This inspection requires work, experience, and knowledge. It is also labor intensive; lasting about 2 hours or more on average. It begins with an intensive investigation of the property outside of the house. It finds flaws in roofs, chimneys, gutters, downspouts, foundations, and/or landscaping. In short, anywhere and any way that water could get into the house and cause a problem. Then, moving inside the inspection closely is conducted looking throughout the house, basement, and attic for issues under windows, sinks, tubs, showers, washer and dryers. Tools such as moisture meters, hygrometers, and boroscopes should be utilized as appropriate.
Following that, in my inspections, I work with a Certified Mold Dog. Together we systematically cover every inch of the house. Dogs such as mine have the ability to detect the scent of mold in one part per trillion. Humans are limited to one part per hundred. Two university studies are known that matched dogs scenting ability versus that of machines. Dogs won easily both times. Dogs have the ability to detect the scent of mold from behind walls, floors, or ceilings where it often is found. No machine can do that. With their ability to pinpoint the location of the mold, remediation costs are reduced to a fraction of what they may have been, or eliminated entirely.
Lastly, the customer should ask for, and receive a professionally written report that captures all that was seen, found, and measured during the inspection and remediation recommendations. This is how my company, Mold Rover, Inc. operates. It is what I think the customer needs and deserves for their money.
Household mold is considered an environmental annoyance that can cause irritation while breathing. It can make the health of asthma patients worse and can cause allergic problems to sensitive persons. The mold may affect children with several problems such as irritation, allergies, and infections.
Household mold comes in a wide variety of species and forms. It differs in colors, including charcoal, grey, and black. There is variation in toxicity for different species. Among the species, six are common in which three can produce toxins. These six common molds are Stachybotris, Aspergillus, Penicillium, Alternaria, Mucor, and Cladosporium. Stachybotris is a toxic mold that can produce more than 200 poisonous substances. These toxins are autoimmune and can affect the nervous system. Aspergillus is an opportunistic fungus that can cause pathological problems to human beings.
Household mold is found everywhere in day to day households. It can grow anywhere, on tiles, grout, food, fabric, plaster, and wood. The mold grows well at room temperature with humidity. Other necessary items for mold growth are adequate moisture and nutrients. These items are obtained from the surface where the mold grows. The mold can destroy the material on which it grows.
There are certain ways to identify and control the presence of household mold. First, check whether there is any sign of moisture or mold at home. A musty smell in a room is an indication of mold growth. If there is any sign of mold, then find the particular surface of the mold growth and clean the surface. Additionally, remove the sources of moisture and keep the moisture content in the rooms at a desired level. Water should not be allowed to stand in drip pans of refrigerators and air conditioners.
Secondly, check whether there is any leakage problem, water stains or water discoloration from taps, especially in the bathrooms and kitchens. If these problems are found, rectify them immediately to prevent the mold growth. Even if the mold is removed, but the water problem is not solved, then the mold will appear again on the same surface.
Black Mold May Cause Sudden Infant Death Syndrome and Miscarriage
There may be many times when indoor mold growth may be difficult to find. It can be hidden behind walls, under surfaces, and inside unreachable areas where the visibility is almost impossible. Just because it's invisible doesn't mean it's undefeatable, however. Here's how to spot hidden mold dangers and make your home a little more livable in this toxin filled world.
One of the most common indications that you may have invisible mold growing in your home is a water leak. If you've had any recent flooding, roof damage or a plumbing leak, you may have a mold problem. Look around the areas where the leak occurred for moisture.
If you still can't find the source of the problem, you may want to call on a professional to help you find any hidden mold dangers in your home. This may seem like an expensive alternative, but remember that mold can turn into a serious problem if they are not resolved quickly. It's always better to be safe than sorry.
- Basement Mold Removal Point Venture
- Basement Mold Removal Cost Point Venture
- Mold Remediation Point Venture
- Mold Removal Point Venture
- Black Mold Inspection Cost Point Venture
- Black Mold Removal Point Venture
- Black Mold Removal Cost Point Venture
- Black Mold Removal Services Point Venture
- Black Mold Specialist Point Venture
- Black Mold Testing Point Venture
- Black Mold Testing Cost Point Venture
- Mold Specialist Point Venture
- Commercial Mold Testing Point Venture
- Cost To Remove Mold From House Point Venture
- Detecting Black Mold In The Home Point Venture
- Home Inspection Mold Testing Point Venture
- Home Mold Inspection Cost Point Venture
- Home Mold Removal Cost Point Venture
- Home Mold Removal Service Point Venture
- House Mold Inspection Point Venture
- House Mold Inspection Cost Point Venture
- House Mold Remediation Point Venture
- House Mold Removal Point Venture
- Indoor Mold Test Point Venture
- Local Mold Removal Point Venture
- Mold Air Test Point Venture
- Mold And Mildew Removal Point Venture
- Mold And Mildew Specialist Point Venture
- Mold And Mildew Testing Point Venture
- Mold Cleaning Point Venture
- Mold Cleaning Service Point Venture
- Mold Cleanup Cost Point Venture
- Mold Detection Point Venture
- Mold Detection Services Point Venture
- Mold Inspection Point Venture
- Mold Inspection And Remediation Point Venture
- Mold Inspection And Removal Point Venture
- Mold Inspection And Testing Point Venture
- Mold Inspection And Testing Point Venture
- Mold Inspection Cost Point Venture
- Mold Inspection Service Point Venture
- Mold Inspection Specialists Point Venture
- Mold Remediation Point Venture
- Mold Remediation Cost Point Venture
- Mold Remediation Services Point Venture
- Mold Remediation Specialist Point Venture
- Mold Removal Services Point Venture
- Mold Removal Specialist Point Venture
- Mold Repair Point Venture
- Mold Restoration Point Venture
- Mold Restoration Services Point Venture
- Mold Testing Point Venture
- Mold Testing And Remediation Point Venture
- Mold Testing And Removal Point Venture
- Mold Testing Cost Point Venture
- Mold Testing Services Point Venture
- Mold Treatment Point Venture