Professional Mold Remediation serving Driftwood Texas
Mold is the result of excess moisture in the surface of the walls and floors and they can be quite dangerous if left unattended. If you are worried about the growth of mold indoors and their possible effects on your possessions, then you are rightly worried. But there is no need for worry anymore when looking for a hire a Mold Remediation Driftwood Company since you have Catstrong LLC to help you remove the mold and ensure that there are no such occurrences in the future.
Trust Catstrong LLC to provide you with the best solution to all your mold problems. Call us at 512-200-7245 or 254-400-2211.
We have been accredited with Home Advisor since the beginning, and are honored to have earned a BBB A+ Accreditation, with over 50 5-Star Reviews!
[prs_reviews aggregate_rating=1 random_reviews=1 limit_reviews=1 limit_reviews_number=1]
Causes and growing conditions and Mold Remediation
Mold generally does not grow in cold environments. Warm, humid conditions are ideal for mold growth. Most molds need temperature of 70 degrees Fahrenheit (20 degrees Celsius) or more to grow. Air conditioners to regulate the temperature of your house can help prevent mold growth.
We received a phone call from a homeowner who was concerned about mold in the bathroom ceiling. My first question to him was: Is there a roof leak that you are not aware of? He told me that a roofer had checked it out and said there was no roof leak. We made an appointment to do an Environmental Inspection of his home. Advised him not to change anything about the home until we got there to do the inspection.
No Moisture, No Mold is our motto concerning mold. During the inspection of the home, it was discovered that there was a slow roof leak that the roofer did not find. This is a common problem we find with roofers because they do not go to the area in the attic to check it out. This location was in the corner with minimal clearance, so the roofer did not go there. Well, the homeowner called another Roofing Company because they felt the previous Roofing Company was incompetent. In the current financial climate, it is important to do the best job possible. This is a prime example of what happens when you do poor quality work, the Roofing Company lost out on valuable work.
In conclusion, roof leaks need to be investigated by a competent Roofing Contractor who checks it out in the attic if accessible. Most mold cases are clear cut and do not need an extensive Microbial Investigation. Just because you do not see mold, doesn’t mean there is not a problem. It can be hidden inside the walls. If you suspect mold, call in an experienced Professional Mold Investigator who has credentials from a valid organization such as the Indoor Air Quality Association. If you are under a Doctors care, always consult with them first before taking any advice concerning Asthma and Allergies from Microbial Growth.
If you have any questions, feel free to call us or visit our website.
Mold Remediation Professional Techniques Customized for Driftwood
Do you know that in an area as small as postage stamps, you will find more than 60 million spores? Well, that is true and molds can be quite dangerous to you and your family. In order for you to keep your property safe from the mold attack and to ensure that your family’s well being is not compromised you need to hire a professional for cleaning the mold.
With Catstrong LLC, you will have a team of professional technicians who will help stem the growth of mold, cleaning the area and sanitizing it, remove the odor caused by the mold and ensure that your place of business or home is restored to its normal state. Call us at 512-200-7245 or 254-400-2211 for expert assistance.
Assessing The Driftwood Texas Mold Remediation Issue
More often than not homeowners do not realize whether they are indeed suffering from mold issues or the extent of the potential damage the mold has on their household. You need the help of a professional to assess the presence of mold and the extent of its growth by performing the necessary tests using the latest equipments and techniques. With our skilled technicians, you will find answers to all your questions in reference to the mold, the extent of the problem and if it even persists. We collect physical evidence from the affected site to analyze and assess the kind of mold so that we can suggest you with the right technique for mold remediation.
Sampling in Driftwood
Think you’ve got mold? Mold sampling is the first thing to do. There are several ways to collect and analyze mold samples. You can take a surface sample, air sample or use a do-it-yourself kit.
Surface Sampling by a qualified Driftwood Company
The most basic type of mold sampling is surface sampling. If you’ve got visible mold in your house, you can take a sample of it, and analyze it to see if it is toxic or not.
There are a number of techniques for taking samples. One method is to use clear tape. Stick the tape to the surface, peel it off, and drop the tape into a plastic bag with the mold sample stuck to it. This sample can then be analyzed.
You can also swab the area for samples. You can take a regular Q-tip and swab the area 3-4 times, then drop the samples into a bag for further inspection.
Air Sampling appropriate for Driftwood
Air sampling is the best way to check your mold problem. The results will tell you if you’ve got airborne mold spores already floating around your house, wreaking havoc on everybody’s lungs.
The inspector uses a pump and spore trap. The pump sucks up air and holds it in the spore trap where it can be analyzed. It pumps not only air, but also bits of dust and insects which can reveal more accurately the amount of spores in the air.
This is the most reliable way to check for mold problems because it looks for the spores themselves. The inspector takes samples from various parts of the house, as well as inside walls and under floors. Often, mold infestations aren’t visible to the naked eye.
At-Home Sampling Kits used in Driftwood
You can buy at-home mold sampling kits to use yourself. These are easy and give quick results. The only downside is that they don’t do as thorough a job as a professional mold inspector. There is some margin for errors.
Mold sampling is the first step in ridding your home of mold. If you think you have a problem, check it out and clean it up immediately.
Driftwood Texas Mold Inspection and Testing Company
We will provide you the requisite answers on the mold growth by performing a complete comprehensive inspection of your property visually and using the latest mold testing techniques. We take not just the samples from visible mold growth, but we also take air samples to assess the quality of air in your property. The air quality will give a better judgment on the presence of mold and the extent of its growth. Wherever there is visible moisture on the surfaces, we take samples from those areas as well to assess mold presence inside the structure.
Driftwood Black Mold Removal
Stachybotrys Chartarum, more commonly known as Black Mold, is one of the most dangerous molds human beings can encounter. Black Mold is a greenish-black fungus that can be found worldwide colonizes extremely well in high cellulose materials such as hay, straw, dry wall, thermal insulation, ceiling tiles, and carpet. The toxic mold exists in about 15 different strains across the world and flourishes in regions where the relative humidity is above 55%. The existence of this toxic mold is particularly concerning to the real estate industry and is becoming an increasing problem in homes located in flood devastated regions around the world.
Where Black Mold Commonly Occurs in Driftwood Properties
Warmer climates however are not the only places where humans need to worry about Black Mold growing in homes. Flood prone regions are also susceptible to outbreaks of the toxic mold as flood waters cause damage to the dry wall, carpets, and wall papers in homes and give the fungus a good breeding ground. The fungus can strike anywhere however as plumbing failures, conductive condensation, and fires in a home can later lead to damp conditions that are ideal for mold.
Removal Of Black Mold – Special Considerations for Driftwood
If mold is discovered in a home it should be removed only by a professional with the proper equipment and protection from the fungus. Only a professional can ensure that the mold is not only removed properly from the home but also responsibly disposed of in the aftermath. However, even with the assistance of a professional, mold can be difficult to defeat.
It is possible that the fungus might never be permanently eliminated from a structure with recurrence a strong possibility. Some structures may need to be torn down completely to avoid recurrence of the toxic mold. Only a professional can make these determinations.
Driftwood Mold Sampling Testing Techniques
Testing for Stachybortrys mold is what professional technicians test for in homes and buildings. This is because the Stachybortrys mold is also called black mold and cane be very toxic. This mold is a greenish black slimy mold that is most often found on cellulose products, such as wood and paper. It does have a strong smell, so one clue you should do some testing for Stachybortrys is the strange musty smell that you get.
You can do you own Stachbortrys black mold testing by using a special mold testing kit. This will save you a lot of money that professional testing for Stachybortrys mold costs and you do the same thing. In the testing kit for black mold, there is a petrie dish containing a disc. You won’t have to touch any black mold when you use this kit, so there is no danger involved. You just expose the disc to the air for about two hours and them close the lid to let it incubate for 48 hours. When you open it after that time, if there is a fungus growing on the disc, then this means that you have mold. It may or may not be black mold.
The main thing you have to look at when testing for Stachybortrys mold is that if you can smell mold you do have a problem. It is not enough to do the Stachybortrys black mold testing and to clean up the mold. If you have a problem with black mold, it means you also have a problem with water or moisture and this needs to be addressed. If you don’t look for and solve this problem, the mold will only come back. Testing for mold is only part of the solution. You also have to do testing to find how the water is getting in.
Sometimes the testing for Stachybortrys mold is only easy to solve. The problem causing the black mold could be condensation building up on the pipes in your basement or it could be the result of not having enough heat in the basement. However, there are times when the Stachbortrys black mold testing calls for extreme measures for you to get rid of the mold. If, for example, the source of the black mold is the underlay under the carpet, this means you will have to take up all the carpet and throw it away. Just testing for Stachbortrys mold will not help you get rid of the toxic mold in your home.
Health Effects of Mold in Driftwood Texas
I maintain a few health related websites, one of which discusses the benefits of air purifiers as well as de-humidifiers and I have done extensive research on mold. I thought it would be appropriate to share them here as the content included some lesser known facts about black mold removal.
According to my research and against the common belief that Stachybotrys is a toxic strain of mold, surprisingly though, it is not deemed as a lethal species. They are the black mold found on your leaky plumbing, toilets, wall sidings, ceiling and roof tops, flooring, even on your carpets at times. You might be relieved to know that contrary to common belief, Stachybotrys is a mold strain not as lethal as the infamous Aspergillus which is proven toxic. Often in homes, both exist side by side. Although the former grows faster during the first week or so, the latter strain is a more robust species and often overwhelms the former.
To help you recognize Stachybotrys, they are black, the tiny colonies with brownish surroundings. You should never use chlorine bleach to scrub and clean out the mold, as they are incapable of killing the mold at its roots. Chlorine bleach should not be used in black mold removal as stated by OSHA’s mold remediation guidelines.
Mold Remediation Cost in Driftwood Texas
Before a person ever decides to search for the best mold inspection company in their area, they should first know a few facts:
1. In the author’s opinion, every house on the planet has mold in it. Mold is a member of the Fungi family and exists naturally in our environment. It is airborne and enters our houses whenever a door or window is open and in numerous other ways.
2. Inside of a house, mold will not be a problem unless it has been exposed to water for more than 48-72 hours. So, if you have seen, or know of evidence of water inside your house and you suspect that it has been there for at least 48 hours, you are most certain to have harmful (toxic) mold.
3. Even if you can’t see any water, it still may be lurking behind your walls, sinks, or tubs; perhaps under windows or other locations. If you can smell a musty or unpleasant odor (some in the family may detect it while others can’t), you have a harmful mold problem.
4. If you or other members of your house have asthma, other respiratory problems, coughing, runny nose or eyes, headaches, or tend to feel much better when you are away from the house and worse when you are in it, you almost certainly have a mold problem.
Knowing that you likely have a mold problem but not knowing what to do next, speaks volumes in favor of hiring a professional. But which one? You could likely have several mold inspection companies to chose from on sites like Yahoo or Google; but how does a homeowner find the best one for their needs?
My advice is: First I recommend that the company specializes in mold. Not mold and/or radon, lead, air ducts, etc. Next, I recommend that they have both education and experience at least equal to or better than their competitors. While most every state requires that home inspectors be licensed, only two states require so of mold inspectors.Are they certified? This would tell you that they cared enough about their profession to acquire knowledge and training to meet standards. Experience counts. How long has the inspector been certified? How many jobs have they performed? Not just the company, but the individual inspector? Can they get references? Have they been cited by the Better Business Bureau for any deceptive, misleading, or dishonest practices?
The next criteria is critical: Are they also in the business of mold remediation or removal? If they are it could be a blatant conflict of interest. Wouldn’t it be to there interest to overstate the level of mold problems and/or the amount of remediation needed if they were in line to pick up a job worth several thousands of dollars? Therefore, I recommend that you find a professional who only inspects for mold.
OK, so now how should your inspector look for and find your problem? When they are finished will they be able to tell you for certain where your mold is and why you have the problem? Isn’t that how you would like to spend your money?
Testing for mold is most often done by the old fashioned method called air testing. This procedure sucks air into a machine that then traps it into a laboratory testing dish, which in turn gets sent to a laboratory for culturing. This process can take a week or more for the results. When air testing is performed, the inspector should always take one test outside of the house in order to determine a benchmark as to what mold(s) are prevalent in your area. They then will try to take as many tests inside of the house as the customer can afford. In most areas of the country, these tests cost about $100 each. Some of the problems with air testing are:
1. The more tests that are performed, the more costly the job.
2. Air testing is highly inaccurate. All it can do is to tell you what was in the air at that location at that moment in time. Results can vary widely over time and method used. Airborne fungal spore concentrations vary greatly over the course of hours, days, weeks, and seasons.
3. In colder climates when there is snow on the ground, the results of the outside test will be useless in that spore count is greatly or totally reduced. I have yet to hear that a customer was told this fact.
4. There are no numerical standards to which tests can be prepared, making interpretation difficult.
5. Even the best tests can not determine how much exposure people in the house have had in the past.
6. Fungal air tests are expensive.
7. Results are slow to receive.
8. Knowing the type of mold does not change the way that you would respond. All mold that is active, or was active, is bad mold.
Then what does represent a professional, accurate, and helpful mold inspection? The most intelligent inspections should: Find all mold. Determine the cause; i.e. Where is the water problem(s). Explain how to fix the problem(s).
This inspection requires work, experience, and knowledge. It is also labor intensive; lasting about 2 hours or more on average. It begins with an intensive investigation of the property outside of the house. It finds flaws in roofs, chimneys, gutters, downspouts, foundations, and/or landscaping. In short, anywhere and any way that water could get into the house and cause a problem. Then, moving inside the inspection closely is conducted looking throughout the house, basement, and attic for issues under windows, sinks, tubs, showers, washer and dryers. Tools such as moisture meters, hygrometers, and boroscopes should be utilized as appropriate.
Following that, in my inspections, I work with a Certified Mold Dog. Together we systematically cover every inch of the house. Dogs such as mine have the ability to detect the scent of mold in one part per trillion. Humans are limited to one part per hundred. Two university studies are known that matched dogs scenting ability versus that of machines. Dogs won easily both times. Dogs have the ability to detect the scent of mold from behind walls, floors, or ceilings where it often is found. No machine can do that. With their ability to pinpoint the location of the mold, remediation costs are reduced to a fraction of what they may have been, or eliminated entirely.
Lastly, the customer should ask for, and receive a professionally written report that captures all that was seen, found, and measured during the inspection and remediation recommendations. This is how my company, Mold Rover, Inc. operates. It is what I think the customer needs and deserves for their money.
Once we have assessed on the kind of mold in your house and the amount of its impact, we then proceed on to implement the best strategy for mold remediation at your property. Our team conducts mold remediation in a phased manner where we remove the mold and ensure that the surface of growth is decontaminated completely and there is sufficient measures put in place to arrest any future growth of molds.
Removing contaminated materials from mold affected areas can be quite a delicate job and it has to be handled with extreme caution. If the mold in question is of the black mold category then disturbing the infected area could cause the mold spores to be airborne. And these are quite dangerous to the people who breathe in the infected air. Our team will ensure that proper protective measures are in place and the property is completely secured before proceeding with mold remediation.
Cleanup and Removal methods
Air duct cleaning Driftwood
Did you know that polluted air is not only found outside your house but also inside your home? Out on the roads the fumes from cars and other vehicles pollute the air and in our homes the culprit is the dirty ducts of the air-conditioning devices. To keep yourself and your family healthy it is important that you clean them regularly. Most of you may complain that with work and seeing to the kids there is really no time for air duct cleaning. But, now there is a solution to your problem, you can hire the services of a professional to clean the ducts.
Breathing in ”unhealthy air” can affect your health. You could suffer from asthma, respiratory problems, irregular sleeping patterns, headaches and exhaustion.
Just cleaning the ducts is not enough. A lot of dust and dirt accumulate on the other parts of the cooling and heating mechanism, which needs to be removed. For such thorough cleaning you are going to require the aid of a professional. He will be able to clean the air duct passages, fan motor, and the other components.
Having the ducts cleaned has a number of benefits. A few of them are listed below:
* Having clean air ducts also means living in a clean indoor environment. Harmful substances like dirt, dust, pollen grains, mold and bacteria get accumulated in the ducts. When the air is flowing through, then these substances are flowing along with it. So, you are breathing in the harmful substances too. But, if you have the ducts cleaned your health will improve. If you are suffering from any breathing problems it will clear up. You will wake up feeling well rested, your house will be less dusty, and your family and pets will be healthier too.
* If there is a lot of debris accumulated then the machine will not be able to function properly. It will not heat or cool the house efficiently. The machine may even break down as it would have to put in more energy to function properly. This could cause an increase in your monthly electricity bills too.
* Dirty ducts may soon become the home of rodents, birds, insects, fungi, and molds. The droppings of the rats and birds could cause irreparable damage to your machine. Moreover the odor from these droppings flows along with the air that is passing through; you in turn breathe in this air which is very unhealthy. You could avoid these problems by cleaning your air ducts regularly.
Driftwood Mold Remediation and Removal
If you are a believer of the proverb “Prevention is better than Cure”, then try to keep your home clean and dry. Even after killing molds with mold cleaning products, they come back to settle on the contaminated surface again.
The good news is: some lab-made organic mold cleaning products help you prevent future mold growth. Look for organic mold removers while cleaning molds. These green products are free from any side effects.
Moisture is essential for molds to live and grow. Make sure the kitchen and bathroom are dried off properly. Use dehumidifier to keep the interior dry.
Mold Removal – Considerations for Driftwood Texas
Using The Right Mold Remediation Driftwood Technique
Once we have identified the affected area, we then proceed onto removing the contaminated mold from the area carefully with the required protection gear in place. While we remove the mold, we ensure the presence of an air scrubber to keep the air cleaner until the mold is removed in its entirety. We then proceed onto using hepa vacuum on the affected surface and use antibacterial solutions, sealants, etc. to arrest any future growth and to ensure that there is no left over within the surface.
Mold Remediation In Homes and Buildings in and around Driftwood
How To Get Rid Of Black Mold
Black mold is a nasty form of mold that can cause serious health problems. It can cause you to experience symptoms related to upper respiratory tract issues such as coughing and wheezing. It can even cause you to develop a condition called hypersensitivity pneumonitis if you are susceptible to this condition. In fact, there is evidence that links indoor mold exposure to respiratory illness in children that are otherwise healthy. Also, people with Chronic Obstructive Pulmonary Disease (COPD) are at risk for developing fungal infections in their lungs.
Getting Rid Of A Nuisance Problem
If you catch the black mold early and before it becomes widespread, it’s relatively easy to eliminate. If the mold is on a hard surface you can get rid of it with a thorough cleaning using a commercial product or by using a solution made with a cup of bleach to 1 gallon of water.
Unfortunately, if the black mold is on some porous material such as ceiling tiles, drywall or carpet you should actually throw the material away. Since you can actually have an allergic reaction to even dead mold, you need to make sure you properly clean and dry the area. If you don’t clean and dry it completely and there is still moisture present, the black mold could come back.
Cleaning The Black Mold Yourself
If you choose to clean up the black mold yourself using bleach, here are some things you need to know.
1. Never mix the bleach with other household cleaners or ammonia. This can produce dangerous, toxic fumes.
2. Be sure to open doors and windows so that you have a good supply of fresh air.
3. Wear protective eyewear and non-porous gloves.
4. If the area you need to clean is more than 10 square feet, you should consult the Environmental Protection Agency’s Guide to Mold Remediation in Schools and Commercial Buildings. This guide may be focused on commercial buildings and schools but applies to other building types as well, including your home.
If you are using bleach or some other commercial cleaning product, be sure to follow all the manufacturer’s instructions for its use.
How To Do The Cleanup
Begin by lightly misting the area to be cleaned with water. Next, scrub the mold with warm soapy water or the bleach mixture described above. When you have cleaned off all the black mold, you will need to spray the area with a disinfectant in order to kill any remaining spores that may not be visible.
Here are some of the best disinfectants you can use.
· Quaternary Ammonium Compounds
· Hypochlorites (such as Clorox Bleach)
· Hydrogen Peroxide
When you have finished the cleaning and disinfecting, seal the room and allow it to dry completely.
Wear Protective Gear
Since black mold can be hazardous to your health, you should wear protective gear while doing that cleanup. For openers, wear a respirator. Second, wear goggles. This will prevent black mold spores from getting into and infecting the delicate structure of your eyes. Third, wear rubber gloves. Finally, be sure to wear clothing that covers your entire body and that can be easily cleaned after you finish removing the mold.
If The Mold Is Extensive
If you have an extensive amount of black mold in your house or basement, it would be best to call a professional mold removal company. However, if you only have small patchy areas, you can remove it as described above and be rid of this nasty stuff!
We proceed to remove the odor causing agents and deodorizing the area only after we are assured of removing the last of the mold spore from your house or office.
Why Should You Choose Catstrong LLC?
Mold Remediation Available Any Time- 24/7 Driftwood
Our emergency response team is available to you on all days of the year at any time during the day or night. With immediate response, we ensure that the mold does not fester and the damage is contained. We are well aware on the damage caused by molds to the property and to the health of people around and hence we try to provide an immediate rescue from the effects of mold.
Priority Customer Service
It has been our mission to ensure that we prioritize our customer’s interest above everything else. We deliver our services with utmost integrity, trust and honesty. We treat your problem as our own and constantly work to assist you. It has been our consistent effort to ensure that the expectations of our customers are met with integrity, compassion and reliability.
Specialists At Your Service
Our team comprises of specialists who have vast experience and knowledge in the field of mold removal and remediation and we apply our knowledge for your betterment. Our technicians are trained and are always ready to meet new challenges and help reduce the severity of loss and damage to your property and health.
We offer mold remediation and removal services for both commercial and residential properties.
Expert Mold Remediation serving Driftwood Texas
Catstrong Restoration and Construction’s Water Damage Experts in Driftwood are on call 24/7 to provide emergency clean up during a very stressful time. If you are doing everything all by yourself, you will be quite overwhelmed and result in MOLD if not done correctly. To avoid the problems and mistakes that could turn up to be a disaster, one should hire a Mold Remediation Driftwood Company. You need to discover a business with skilled team of personnel it will be good for you in future. Catstrong Restoration and Construction have the experience of recovering your house from water damage really quickly in a stress free manner.
If you are residing in Texas , the faster your telephone call, the lower your losses will certainly be. A lot of insurance provider require the insured to act swiftly to minimize the damage. Catstrong Restoration and Construction specifically in Driftwood as well as the surrounding locations explore, examine, and produce repair service price quotes in Xactimate which is accepted by the majority of the biggest insurance provider in the USA. As a result of this reality, the turnaround time for restoring your house is usually reduced. Offer us a call! You have practically nothing to lose by hiring experts.
Driftwood Mold Removal
If water from a leak or a flood is not dried out properly from your home or office, they can seep into the structure and result in the formation of molds. In order to remove the mold, we need to identify the source for its appearance and kill it right there. Catstrong LLC employs serving Driftwood the latest equipments and technology in identifying the mold’s source and in ensuring that the same is removed completely without any trace. Once the mold is removed, we use the dehumidification processes and help dry out the surface (in and out) completely. This will prevent from any further mold occurrence. We even help removing the dangerous black molds with extreme caution and care.
How do you dispose of mold?
Mold Remediation and Removal Costs | HGTV
- How do you dispose of mold?
Wear a respirator or a facemask rated for black moldspore protection, and cover arms, legs and hands to avoid contact with mold spores. Use soap and a sponge to remove visible mold. If the moldy area is dry, lightly spray with water, as this will reduce the incidence of airborne mold spores during cleaning.
- How do you get rid of black mold?
- What is the process of removing mold?
People also ask
Is mold removal expensive?
How do you dispose of mold?
How do you get rid of black mold?
What is the process of removing mold?
Is mold damage covered by insurance?
How do you stop mold from growing?
Can mold in your house make you sick?
Is black mold covered by insurance?
What kills black mold naturally?
How do you know if it’s black mold?
What kills mold on walls?
How do you clean mold without using bleach?
What kills black mold on wood?
How do you remove mold from walls?
Can you paint over mold with Kilz?
How much does it cost to clean up mold?
Are leaky pipes covered by insurance?
How long does it take for mold to grow on walls?
What causes mold in your house?
How long does mold live without water?
What mold can do to your body?
Can mold cause cancer in humans?
Are Leaking roofs covered by homeowners insurance?
Is water damage covered by homeowners insurance?
Commercial Clean Up
It is not just your residential properties that can fall prey to the water and fire damage or to the molds. The commercial and business properties are equally vulnerable. While the residential property damage will disrupt your daily life, the business property damage can cause a much bigger disruption in your business and hence in your financial position. If you are suffering from Driftwood water damage or fire damage or even molds at your business area, then contact us immediately to assist you. We are available 24×7 to assist you in your emergency situations. Standing water will contaminate not just the area but can cause irreparable damage to the property. Unattended fire damage can cause internal damage to your structure. Mold if unattended can cause health issues to everyone working in the place.
[rssonpage rss=”http://www.bing.com/search?q=Driftwood &format=rss” feeds=”1″ excerpt=”summery true” target=”_blank”]
Mold (American English) or mould (British English) is part of the natural environment. Molds play an important part in nature by breaking down dead organic matter such as fallen leaves and dead trees; indoors, mold growth should be avoided. Molds reproduce by means of tiny spores. The spores are like seeds, but invisible to the naked eye, that float through the air. Mold may begin growing indoors when spores land on moist surfaces. There are many types of mold, but all require moisture and a food source for growth.
[rssonpage rss=”http://www.bing.com/search?q=IICRC&;format=rss” feeds=”1″ excerpt=”summery true” target=”_blank”]
[rssonpage rss=”http://www.bing.com/search?q=Restoration+Industry+Association&;format=rss” feeds=”1″ excerpt=”summery true” target=”_blank”]
[rssonpage rss=”http://www.bing.com/search?q=city+of+Driftwood+TX&;format=rss” feeds=”10″ excerpt=”summery true” target=”_blank”]
Business Results 1 - 4 of 2
For More Information on mold remediation Driftwood