Expert Mold Removal serving Bertram Texas
Mold is the result of excess moisture in the surface of the walls and floors and they can be quite dangerous if left unattended. If you are worried about the growth of mold indoors and their possible effects on your possessions, then you are rightly worried. But there is no need for worry anymore when looking for a hire a Mold Removal Bertram Company since you have Catstrong LLC to help you remove the mold and ensure that there are no such occurrences in the future.
Trust Catstrong LLC to provide you with the best solution to all your mold problems. Call us at 512-200-7245 or 254-400-2211.
We have been accredited with Home Advisor since the beginning, and are honored to have earned a BBB A+ Accreditation, with over 50 5-Star Reviews!
[prs_reviews aggregate_rating=1 random_reviews=1 limit_reviews=1 limit_reviews_number=1]
Causes and growing conditions and Mold Removal
Mold generally does not grow in cold environments. Warm, humid conditions are ideal for mold growth. Most molds need temperature of 70 degrees Fahrenheit (20 degrees Celsius) or more to grow. Air conditioners to regulate the temperature of your house can help prevent mold growth.
We received a phone call from a homeowner who was concerned about mold in the bathroom ceiling. My first question to him was: Is there a roof leak that you are not aware of? He told me that a roofer had checked it out and said there was no roof leak. We made an appointment to do an Environmental Inspection of his home. Advised him not to change anything about the home until we got there to do the inspection.
No Moisture, No Mold is our motto concerning mold. During the inspection of the home, it was discovered that there was a slow roof leak that the roofer did not find. This is a common problem we find with roofers because they do not go to the area in the attic to check it out. This location was in the corner with minimal clearance, so the roofer did not go there. Well, the homeowner called another Roofing Company because they felt the previous Roofing Company was incompetent. In the current financial climate, it is important to do the best job possible. This is a prime example of what happens when you do poor quality work, the Roofing Company lost out on valuable work.
In conclusion, roof leaks need to be investigated by a competent Roofing Contractor who checks it out in the attic if accessible. Most mold cases are clear cut and do not need an extensive Microbial Investigation. Just because you do not see mold, doesn’t mean there is not a problem. It can be hidden inside the walls. If you suspect mold, call in an experienced Professional Mold Investigator who has credentials from a valid organization such as the Indoor Air Quality Association. If you are under a Doctors care, always consult with them first before taking any advice concerning Asthma and Allergies from Microbial Growth.
If you have any questions, feel free to call us or visit our website.
Mold Removal Professional Techniques Customized for Bertram
Do you know that in an area as small as postage stamps, you will find more than 60 million spores? Well, that is true and molds can be quite dangerous to you and your family. In order for you to keep your property safe from the mold attack and to ensure that your family’s well being is not compromised you need to hire a professional for cleaning the mold.
With Catstrong LLC, you will have a team of professional technicians who will help stem the growth of mold, cleaning the area and sanitizing it, remove the odor caused by the mold and ensure that your place of business or home is restored to its normal state. Call us at 512-200-7245 or 254-400-2211 for expert assistance.
Assessing The Bertram Texas Mold Removal Issue
More often than not homeowners do not realize whether they are indeed suffering from mold issues or the extent of the potential damage the mold has on their household. You need the help of a professional to assess the presence of mold and the extent of its growth by performing the necessary tests using the latest equipments and techniques. With our skilled technicians, you will find answers to all your questions in reference to the mold, the extent of the problem and if it even persists. We collect physical evidence from the affected site to analyze and assess the kind of mold so that we can suggest you with the right technique for mold remediation.
Sampling in Bertram
Mold (American English) is part of the natural environment. Outdoors, molds play a part in nature by breaking down dead organic matter such as fallen leaves and dead trees; indoors, mold growth should be avoided. Molds reproduce by means of tiny spores. The spores are invisible to the naked eye and float through the air. Mold may begin growing indoors when spores land on moist surfaces. There are many types of mold, but all require moisture for growth.
Molds are ubiquitous, and mold spores are a common component of household and workplace dust. In large amounts they can be a health hazard to humans, potentially causing allergic reactions and respiratory problems.
Some molds produce mycotoxins that can pose serious health risks to humans and animals. “Toxic mold” refers to molds which produce mycotoxins, such as Stachybotrys chartarum. Exposure to high levels of mycotoxins can lead to neurological problems and death. Prolonged exposure (for example, daily exposure) can be particularly harmful.
Symptoms of mold exposure may include nasal and sinus congestion; runny nose, eye irritation; itchy, red, watery eyes, respiratory problems, such as wheezing and difficulty breathing, chest tightness, cough, throat irritation, skin irritation (such as a rash), headache, and persistent sneezing.
Infants may develop respiratory symptoms as a result of exposure to Penicillium, a fungal genus. Signs of mold-related respiratory problems in an infant include a persistent cough or wheeze. Increased exposure increases the probability of developing respiratory symptoms during the first year of life. Studies have indicated a correlation between the probability of developing asthma and exposure to Penicillium.
Mold exposure has a variety of health effects, and sensitivity to mold varies. Exposure to mold may cause throat irritation, nasal stuffiness, eye irritation, cough and wheezing and skin irritation in some cases. Exposure to mold may heighten sensitivity, depending on the time and nature of exposure. People with chronic lung diseases are at higher risk for mold allergies, and will experience more severe reactions when exposed to mold. Damp indoor environments correlate with upper-respiratory-tract symptoms, such as coughing and wheezing in people with asthma.
Molds are found everywhere, and can grow on almost any substance when moisture is present. They reproduce by spores, which are carried by air currents. When spores land on a moist surface suitable for life, they begin to grow. Mold is normally found indoors at levels which do not affect most healthy individuals.
Because common building materials are capable of sustaining mold growth and mold spores are ubiquitous, mold growth in an indoor environment is typically related to water or moisture and may be caused by incomplete drying of flooring materials (such as concrete). Flooding, leaky roofs, building-maintenance or indoor-plumbing problems can lead to interior mold growth. Water vapor commonly condenses on surfaces cooler than the moisture-laden air, enabling mold to flourish. This moisture vapor passes through walls and ceilings, typically condensing during the winter in climates with a long heating season. Floors over crawl spaces and basements, without vapor barriers or with dirt floors, are mold-prone. The “doormat test” detects moisture from concrete slabs without a sub-slab vapor barrier. Some materials, such as polished concrete, do not support mold growth.
Significant mold growth requires moisture and food sources and a substrate capable of sustaining growth. Common building materials, such as plywood, drywall, furring strips, carpets, and carpet padding provide food for mold. In carpet, invisible dust and cellulose are food sources. After water damage to a building, mold grows in walls and then becomes dormant until subsequent high humidity; suitable conditions reactivate mold. Mycotoxin levels are higher in buildings which have had a water incident.
Although this home experienced minor exterior damage from Hurricane Katrina, small leaks and inadequate airflow permitted mold infestation.
Mold is detectable by smell and signs of water damage on walls or ceiling, and can grow in places invisible to the human eye. It may be found behind wallpaper or paneling, on the inside of ceiling tiles, the back of drywall, or the underside of carpets or carpet padding. Piping in walls may also be a source of mold, since they may leak (causing moisture and condensation).
Spores need three things to grow into mold: nutrients – cellulose (the cell wall of green plants) is a common food for indoor spores; moisture – To begin the decaying process caused by mold; time -mold growth begins from 24 hours to 10 days after the provision of growing conditions.
Mold colonies can grow inside buildings, and the chief hazard is the inhalation of mycotoxins. After a flood or major leak, mycotoxin levels are higher even after a building has dried out.
Food sources for mold in buildings include cellulose-based materials such as wood, cardboard and the paper facing on drywall and organic matter such as soap, fabrics and dust-containing skin cells. If a house has mold, the moisture may originate in the basement or crawl space, a leaking roof or a leak in plumbing pipes. Insufficient ventilation may accelerate moisture buildup. Visible mold colonies may form where ventilation is poorest and on perimeter walls (because they are nearest the dew point).
If there are mold problems in a house only during certain times of the year, the house is probably too airtight or too drafty. Mold problems occur in airtight homes more frequently in the warmer months (when humidity is high inside the house, and moisture is trapped), and occur in drafty homes more frequently in the colder months (when warm air escapes from the living area and condenses). If a house is artificially humidified during the winter, this can create conditions favorable to mold. Moving air may prevent mold from growing, since it has the same desiccating effect as low humidity. Molds grow best in warm temperatures, 77 to 86 °F (25 to 30 °C), although growth may occur between 32 and 95 °F (0 and 35 °C).
Removing one of the three requirements for mold reduces (or eliminates) new mold growth: moisture; food for the mold spores (for example, dust or dander); and warmth since mold generally does not grow in cold environments.
HVAC systems can produce all three requirements for mold growth. The air conditioning system creates a difference in temperature, encouraging condensation. The high rate of dusty air movement through an HVAC system may furnish ample food for mold. Since the air-conditioning system is not always running, warm conditions are the final component for mold growth.
The first step in assessment is to non-intrusively determine if mold is present by visually examining the premises; visible mold helps determine the level of remediation necessary. If mold is actively growing and visibly confirmed, sampling for its specific species is unnecessary.
Intrusive observation is sometimes needed to assess the mold level. This includes moving furniture, lifting (or removing) carpets, checking behind wallpaper or paneling, checking ventilation ductwork and exposing wall cavities. Detailed visual inspection and the recognition of moldy odors should be used to find problems. Efforts should focus on areas where there are signs of liquid moisture or water vapor (humidity), or where moisture problems are suspected.
The United States Environmental Protection Agency (EPA) does not generally recommend sampling unless an occupant of the space has symptoms. Sampling should be performed by a trained professional with specific experience in mold-sampling protocols, sampling methods and the interpretation of findings. It should be done only to make a particular determination, such as airborne spore concentration or identifying a particular species. Before sampling, a subsequent course of action should be determined.
In the U.S., sampling and analysis should follow the recommendations of the Occupational Safety and Health Administration (OSHA), National Institute for Occupational Safety and Health (NIOSH), the EPA and the American Industrial Hygiene Association (AIHA).
Types of samples include air, surface, bulk, and swab. Air is the most common form of sampling to assess mold levels. Indoor and outdoor air are sampled, and their mold-spore levels compared. Air sampling often identifies hidden mold. Surface sampling measures the number of mold spores deposited on indoor surfaces, collected on tape or in dust. Bulk removal of material from the contaminated area is used to identify and quantify the mold in the sample. With swab, a cotton swab is rubbed across the area being sampled, often a measured area, and subsequently sent to the mold testing laboratory. Final results indicate mold levels and species located in suspect area.
Multiple types of sampling are recommended by the AIHA, since each has limitations; for example, air samples will not identify a hidden mold source and a tape sample cannot determine the level of contamination in the air.
Bertram Mold Remediation
The first step in solving an indoor mold problem is to remove the moisture source; new mold will begin to grow on moist, porous surfaces within 24 to 48 hours. There are a number of ways to prevent mold growth. Some cleaning companies specialize in fabric restoration, removing mold (and mold spores) from clothing to eliminate odor and prevent further damage to garments.
The effective way to clean mold is to use detergent solutions which physically remove mold. Many commercially available detergents marketed for mold cleanup include an EPA-approved antifungal agent.
Significant mold growth may require professional mold remediation to remove the affected building materials and eradicate the source of excess moisture. In extreme cases of mold growth in buildings, it may be more cost-effective to condemn the building than to reduce mold to safe levels.
The goals of remediation are to remove (or clean) contaminated materials, preventing fungi (and fungi-contaminated dust) from entering an occupied (or non-contaminated) area while protecting workers performing the abatement.
The purpose of cleanup is to eliminate mold and remove contaminated materials. Killing mold with a biocide is insufficient, since chemicals and proteins causing reactions in humans remain in dead mold. The following methods are used.
Equipment used in mold remediation includes: moisture meter: measures drying of damaged materials; Humidity gauge: often paired with a thermometer; borescope: Camera at the end of a flexible snake, illuminating potential mold problems inside walls, ceilings and crawl spaces; digital camera: Documents findings during assessment; personal protective equipment (PPE): Respirators, gloves, impervious suit, and eye protection; thermographic camera: Infrared thermal-imaging cameras identify secondary moisture sources.
After remediation, the premises should be reevaluated to ensure success.
According to the EPA, residential mold may be prevented and controlled icy cleaning and repairing roof gutters, to prevent moisture seepage into the home; keeping air-conditioning drip pans clean and drainage lines clear; monitoring indoor humidity; drying areas of moisture or condensation and removing their sources; treating exposed structural wood or wood framing with an EPA-approved fungicidal encapsulation coating after pre-cleaning (particularly homes with a crawl space, unfinished basement or a poorly-ventilated; attic).
Bertram Texas Mold Inspection and Testing Company
We will provide you the requisite answers on the mold growth by performing a complete comprehensive inspection of your property visually and using the latest mold testing techniques. We take not just the samples from visible mold growth, but we also take air samples to assess the quality of air in your property. The air quality will give a better judgment on the presence of mold and the extent of its growth. Wherever there is visible moisture on the surfaces, we take samples from those areas as well to assess mold presence inside the structure.
Bertram Black Mold Removal
Stachybotrys Chartarum, more commonly known as Black Mold, is one of the most dangerous molds human beings can encounter. Black Mold is a greenish-black fungus that can be found worldwide colonizes extremely well in high cellulose materials such as hay, straw, dry wall, thermal insulation, ceiling tiles, and carpet. The toxic mold exists in about 15 different strains across the world and flourishes in regions where the relative humidity is above 55%. The existence of this toxic mold is particularly concerning to the real estate industry and is becoming an increasing problem in homes located in flood devastated regions around the world.
Where Black Mold Commonly Occurs in Bertram Properties
Warmer climates however are not the only places where humans need to worry about Black Mold growing in homes. Flood prone regions are also susceptible to outbreaks of the toxic mold as flood waters cause damage to the dry wall, carpets, and wall papers in homes and give the fungus a good breeding ground. The fungus can strike anywhere however as plumbing failures, conductive condensation, and fires in a home can later lead to damp conditions that are ideal for mold.
Removal Of Black Mold – Special Considerations for Bertram
If mold is discovered in a home it should be removed only by a professional with the proper equipment and protection from the fungus. Only a professional can ensure that the mold is not only removed properly from the home but also responsibly disposed of in the aftermath. However, even with the assistance of a professional, mold can be difficult to defeat.
It is possible that the fungus might never be permanently eliminated from a structure with recurrence a strong possibility. Some structures may need to be torn down completely to avoid recurrence of the toxic mold. Only a professional can make these determinations.
Bertram Mold Sampling Testing Techniques
Molds can still be there in your home when there is no prominent signal of their presence. Mildews are so small that you cannot see them. And they make full use of their size; they float in air and spread around.
Mold inspection or mold testing is done to confirm whether molds are present in indoor environment or not. Mold testing yields many useful information like the type of mold infection, extent of mold growth inside your home, spore count or density of mold spores in indoor air and the exact location of mold infection.
Such information helps you understand whether or not staying in the house can be health hazardous. You get a fair idea on how pure the air you are inhaling is. Once you know the level of mold growth, you can take decision if it is urgent to shift people with weak immune system somewhere else.
Health Effects of Mold in Bertram Texas
I maintain a few health related websites, one of which discusses the benefits of air purifiers as well as de-humidifiers and I have done extensive research on mold. I thought it would be appropriate to share them here as the content included some lesser known facts about black mold removal.
According to my research and against the common belief that Stachybotrys is a toxic strain of mold, surprisingly though, it is not deemed as a lethal species. They are the black mold found on your leaky plumbing, toilets, wall sidings, ceiling and roof tops, flooring, even on your carpets at times. You might be relieved to know that contrary to common belief, Stachybotrys is a mold strain not as lethal as the infamous Aspergillus which is proven toxic. Often in homes, both exist side by side. Although the former grows faster during the first week or so, the latter strain is a more robust species and often overwhelms the former.
To help you recognize Stachybotrys, they are black, the tiny colonies with brownish surroundings. You should never use chlorine bleach to scrub and clean out the mold, as they are incapable of killing the mold at its roots. Chlorine bleach should not be used in black mold removal as stated by OSHA’s mold remediation guidelines.
Mold Remediation Cost in Bertram Texas
Leaking Dryer Vents are a typical problem that we find all the time. This is one of the locations that are inspected in our Environmental Inspection process. It is very common to find high levels of lint behind the Washer/Dryer location. Sometimes we find mold growing in this location and other times we do not find mold. It is important to check this periodically because this can be a high humidity area.
There are several reasons why this problem occurs. We will list them now:
1. Improper installation on Day One of the Washer/Dryer Installation. What happens is the clamp on the vent pipe is not secured properly and when the Dryer is pushed back in, the vent pipe slips off. This is an installer error but not all installers are created equally. This can cause a serious moisture problem in this area. If not fixed immediately, the possibility of mold growth can happen.
In conclusion, it is important that you have this system inspected on a yearly basis to make sure you have not developed any leaks. It is also important to have this system cleaned every two years because of a possible Fire Hazard. This is also in addition to the possibility of Mold Growth in this area. As always, if you suspect any type of problem in Washer/Dryer Area, call a licensed Professional to check it out.
Once we have assessed on the kind of mold in your house and the amount of its impact, we then proceed on to implement the best strategy for mold remediation at your property. Our team conducts mold remediation in a phased manner where we remove the mold and ensure that the surface of growth is decontaminated completely and there is sufficient measures put in place to arrest any future growth of molds.
Removing contaminated materials from mold affected areas can be quite a delicate job and it has to be handled with extreme caution. If the mold in question is of the black mold category then disturbing the infected area could cause the mold spores to be airborne. And these are quite dangerous to the people who breathe in the infected air. Our team will ensure that proper protective measures are in place and the property is completely secured before proceeding with mold remediation.
Cleanup and Removal methods
Air duct cleaning Bertram
Did you know that polluted air is not only found outside your house but also inside your home? Out on the roads the fumes from cars and other vehicles pollute the air and in our homes the culprit is the dirty ducts of the air-conditioning devices. To keep yourself and your family healthy it is important that you clean them regularly. Most of you may complain that with work and seeing to the kids there is really no time for air duct cleaning. But, now there is a solution to your problem, you can hire the services of a professional to clean the ducts.
Breathing in ”unhealthy air” can affect your health. You could suffer from asthma, respiratory problems, irregular sleeping patterns, headaches and exhaustion.
Just cleaning the ducts is not enough. A lot of dust and dirt accumulate on the other parts of the cooling and heating mechanism, which needs to be removed. For such thorough cleaning you are going to require the aid of a professional. He will be able to clean the air duct passages, fan motor, and the other components.
Having the ducts cleaned has a number of benefits. A few of them are listed below:
* Having clean air ducts also means living in a clean indoor environment. Harmful substances like dirt, dust, pollen grains, mold and bacteria get accumulated in the ducts. When the air is flowing through, then these substances are flowing along with it. So, you are breathing in the harmful substances too. But, if you have the ducts cleaned your health will improve. If you are suffering from any breathing problems it will clear up. You will wake up feeling well rested, your house will be less dusty, and your family and pets will be healthier too.
* If there is a lot of debris accumulated then the machine will not be able to function properly. It will not heat or cool the house efficiently. The machine may even break down as it would have to put in more energy to function properly. This could cause an increase in your monthly electricity bills too.
* Dirty ducts may soon become the home of rodents, birds, insects, fungi, and molds. The droppings of the rats and birds could cause irreparable damage to your machine. Moreover the odor from these droppings flows along with the air that is passing through; you in turn breathe in this air which is very unhealthy. You could avoid these problems by cleaning your air ducts regularly.
Bertram Mold Remediation and Removal
Mold can appear in one’s home for a variety of reasons. It could be the result of a catastrophe such as a flood, hurricane, or typhoon. It could also result from broken plumbing pipes or simply because of a high humidity and moist region in one’s home. Bathrooms and basements tend to be damp spaces where mold shows up.
Whatever the cause and scale of the problem, the homeowner must get rid of it. Health problems including breathing difficulties, infectious skin lesions and allergic reactions may begin to affect the inhabitants of a home infested with mold and mildew.
Four main steps must be taken if this appears to be a problem in your abode.
If you have a mold problem that seems fairly extensive, it would be a good idea to have the premises inspected by a professional who specializes in these issues. A professional will know the most optimum methods for eradication and removal. Don’t take a chance with the health of your family and the investment value of your home.
Mold Removal – Considerations for Bertram Texas
Using The Right Mold Removal Bertram Technique
Once we have identified the affected area, we then proceed onto removing the contaminated mold from the area carefully with the required protection gear in place. While we remove the mold, we ensure the presence of an air scrubber to keep the air cleaner until the mold is removed in its entirety. We then proceed onto using hepa vacuum on the affected surface and use antibacterial solutions, sealants, etc. to arrest any future growth and to ensure that there is no left over within the surface.
Mold Remediation In Homes and Buildings in and around Bertram
Bertram Mold Remediation:
Do I have mold in my Bertram building?
If moisture is or was present you may have mold. Mold also needs food to grow. It grows well in moist, dark, unventilated areas like wall cavities and attics but can grow in open moist areas like bathrooms.
Can I stop Bertram mold from growing?
Antimicrobials can be used but eliminating the moisture by having a professional mold remediation company dry or remove it is the best solution.
What steps can I take to prevent mold?
Keep the moisture level in your home under control by using a Dehumidifier. If you see moisture on your windows, lower the moisture content in the air. Insure that all bathroom vents are vented properly. Insure that your attic is insulated and ventilated properly. Insure that you are using your humidifier properly. Look for signs of seepage in the basement. Call a professional mold remediation company to inspect your home and suggest the proper solutions.
We proceed to remove the odor causing agents and deodorizing the area only after we are assured of removing the last of the mold spore from your house or office.
Why Should You Choose Catstrong LLC?
Mold Removal Available Any Time- 24/7 Bertram
Our emergency response team is available to you on all days of the year at any time during the day or night. With immediate response, we ensure that the mold does not fester and the damage is contained. We are well aware on the damage caused by molds to the property and to the health of people around and hence we try to provide an immediate rescue from the effects of mold.
Priority Customer Service
It has been our mission to ensure that we prioritize our customer’s interest above everything else. We deliver our services with utmost integrity, trust and honesty. We treat your problem as our own and constantly work to assist you. It has been our consistent effort to ensure that the expectations of our customers are met with integrity, compassion and reliability.
Specialists At Your Service
Our team comprises of specialists who have vast experience and knowledge in the field of mold removal and remediation and we apply our knowledge for your betterment. Our technicians are trained and are always ready to meet new challenges and help reduce the severity of loss and damage to your property and health.
We offer mold remediation and removal services for both commercial and residential properties.
Trusted Mold Removal serving Bertram Texas
Catstrong Restoration and Construction’s Water Extraction Professionals in Bertram are on call 24/7 to provide emergency clean up during a very stressful time. If you are doing everything all by yourself, you will be quite overwhelmed and result in MOLD if not done correctly. To avoid the problems and mistakes that could turn up to be a disaster, one should hire a Mold Removal Bertram Company. You need to discover a company with seasoned team of workers it will be good for you in future. Catstrong Restoration and Construction have the experience of restoring your house from water damage really quickly in an anxiety free manner.
If you are living in Texas , the quicker your phone call, the lower your losses will be. Many insurance provider need the guaranteed to act swiftly to alleviate the damage. Catstrong Restoration and Construction specifically in Bertram and the surrounding areas explore, evaluate, and also create fixing estimates in Xactimate which is approved by the majority of the biggest insurance provider in the USA. As a result of this fact, the turnaround time for restoring your home or business is often lowered. Offer us a telephone call! You have almost nothing to lose by employing experts.
Bertram Mold Removal
If water from a leak or a flood is not dried out properly from your home or office, they can seep into the structure and result in the formation of molds. In order to remove the mold, we need to identify the source for its appearance and kill it right there. Catstrong LLC employs serving Bertram the latest equipments and technology in identifying the mold’s source and in ensuring that the same is removed completely without any trace. Once the mold is removed, we use the dehumidification processes and help dry out the surface (in and out) completely. This will prevent from any further mold occurrence. We even help removing the dangerous black molds with extreme caution and care.
How do you dispose of mold?
Mold Remediation and Removal Costs | HGTV
- How do you dispose of mold?
Wear a respirator or a facemask rated for black moldspore protection, and cover arms, legs and hands to avoid contact with mold spores. Use soap and a sponge to remove visible mold. If the moldy area is dry, lightly spray with water, as this will reduce the incidence of airborne mold spores during cleaning.
- How do you get rid of black mold?
- What is the process of removing mold?
People also ask
Is mold removal expensive?
How do you dispose of mold?
How do you get rid of black mold?
What is the process of removing mold?
Is mold damage covered by insurance?
How do you stop mold from growing?
Can mold in your house make you sick?
Is black mold covered by insurance?
What kills black mold naturally?
How do you know if it’s black mold?
What kills mold on walls?
How do you clean mold without using bleach?
What kills black mold on wood?
How do you remove mold from walls?
Can you paint over mold with Kilz?
How much does it cost to clean up mold?
Are leaky pipes covered by insurance?
How long does it take for mold to grow on walls?
What causes mold in your house?
How long does mold live without water?
What mold can do to your body?
Can mold cause cancer in humans?
Are Leaking roofs covered by homeowners insurance?
Is water damage covered by homeowners insurance?
Commercial Clean Up
It is not just your residential properties that can fall prey to the water and fire damage or to the molds. The commercial and business properties are equally vulnerable. While the residential property damage will disrupt your daily life, the business property damage can cause a much bigger disruption in your business and hence in your financial position. If you are suffering from Bertram water damage or fire damage or even molds at your business area, then contact us immediately to assist you. We are available 24×7 to assist you in your emergency situations. Standing water will contaminate not just the area but can cause irreparable damage to the property. Unattended fire damage can cause internal damage to your structure. Mold if unattended can cause health issues to everyone working in the place.
[rssonpage rss=”http://www.bing.com/search?q=Bertram &format=rss” feeds=”1″ excerpt=”summery true” target=”_blank”]
Mold (American English) or mould (British English) is part of the natural environment. Molds play an important part in nature by breaking down dead organic matter such as fallen leaves and dead trees; indoors, mold growth should be avoided. Molds reproduce by means of tiny spores. The spores are like seeds, but invisible to the naked eye, that float through the air. Mold may begin growing indoors when spores land on moist surfaces. There are many types of mold, but all require moisture and a food source for growth.
[rssonpage rss=”http://www.bing.com/search?q=IICRC&;format=rss” feeds=”1″ excerpt=”summery true” target=”_blank”]
[rssonpage rss=”http://www.bing.com/search?q=Restoration+Industry+Association&;format=rss” feeds=”1″ excerpt=”summery true” target=”_blank”]
[rssonpage rss=”http://www.bing.com/search?q=city+of+Bertram+TX&;format=rss” feeds=”10″ excerpt=”summery true” target=”_blank”]
Business Results 1 - 3 of 39
Business Results 1 - 4 of 1
For More Information on mold remediation Bertram